The minimum is 200,000, and the technology configuration is full: check the domestic 800V models worth buying.

[Shopping guide after having a car] As we all know, at the moment when there are still technical bottlenecks in the development of power batteries, the 800V high-voltage platform that pursues faster recharge has become a technical route favored by car companies. The earliest introduction of 800V high-voltage technology was Porsche’s pure electric sports car Taycan, but the high price made it difficult for most people to experience the technology dividend. Fortunately, nowadays, 800V high-voltage technology is no longer just the patent of some luxury high-end brands, and a large number of domestic brands have successively launched 800V platform models, making ultra-fast charging within reach and more cost-effective. Let’s take a look at who are the most worthwhile domestic 800V models.

Guide price: 249,800-349,800 yuan.

As a product of the strong cooperation between Huawei and Chery, Zhijie S7 is equipped with a number of "far ahead" black technologies. The new car is based on 800V high-voltage platform, including Huawei’s new generation DriveONE 800V silicon carbide power platform and Huawei’s "Giant Whale" 800V high-voltage battery platform. This not only brought it a powerful power of 3.3 seconds, but also made it have the longest cruising range of 855km and 12.4 kWh of power consumption per 100 km. Charging at 800V super fast for 5 minutes can increase the battery life by 215km, and the main theme is "worry-free travel".

In addition to 800V, Zhijie S7 is also equipped with HarmonyOS 4 intelligent cockpit, ADS 2.0 intelligent driver and Turing intelligent chassis. The first two are the trump cards of Huawei’s smart travel, and the strength needs no further explanation. The latter is also extremely high in Chinese content. It applies the multi-modal fusion sensing system, Huawei DATS dynamic adaptive torque system and Huawei xMotion intelligent body collaborative control system, and with the air suspension +CDC electronic control shock absorption, it can bring a driving and control experience with both comfort and sports. However, it is a pity that the Turing smart chassis will only be equipped with a four-wheel drive model. To get the most complete experience, the cost is not small.

Pre-sale price: starting from 229,900 yuan

The Krypton 007, which has just started pre-sale, is the first 800V platform model of the Krypton brand. Although the brand-new design language and the storm of promotional videos have caused a lot of controversy, the achievement of pre-selling 20,000 orders in 48 hours still shows everyone’s enthusiasm and expectation for it.

In terms of power, the new car is equipped with a silicon carbide rear motor with the same model of Krypton 001 FR, and the zero-hundred acceleration time of the four-wheel drive version has reached an astonishing 2.84 seconds. At the same time, with the blessing of 800V technology, the longest battery life of the new car can reach 870km, and the battery life can be increased by 240km when the pile is filled at 800V for 5 minutes, and the experience of "shaking ahead" with Yang can be experienced.

In addition, Krypton 007 is expected to be equipped with three lidar, Qualcomm Snapdragon 8295 chip, KrGPT AI large model, 15.05-inch central control large screen and 35.5-inch AR-HUD, and the intelligent experience can not be underestimated. The penetrating intelligent light curtain with self-defined light language on the front face may also lead the new trend in the future. It is reported that Krypton 007 will be officially listed in January next year.

Guide price: 209,900-276,900 yuan.

Tucki G6 is the first model of SEPA 2.0 boost architecture in Tucki. It is built on the global 800V high-voltage SiC silicon carbide platform. The whole system comes standard with 3C batteries. The peak power of fast charging can reach 280kW, and the battery life can be increased by 300km after 10 minutes of charging. At the same time, its comprehensive cruising range can reach up to 755km, and its comprehensive power consumption per 100 km is only 13.2kWh. It is also a persistent player without mileage anxiety.

Tucki G6′ s point of view is not limited to this, it also has the leading intelligent driving experience in the industry. Its whole vehicle is equipped with 31 high-precision sensors and dual OrinX chips, with a computing power of up to 508TOPS. Strong perception ability enables XNGP intelligent driving system to achieve pilot-assisted driving covering urban areas and high speed, and urban pilot assistance can be achieved without high-precision maps, and its strength is not lost to Huawei.

Of course, the driving quality of Tucki G6 is also excellent, with the fastest acceleration of 3.9 seconds at zero hundred, the front double wishbone+rear five-link+stabilizer bar+intelligent four-wheel drive, and the integrated aluminum die-casting body and CIB battery body technology, so that the vehicle can provide a stable, comfortable and safe driving experience at all times.

Guide price: 229,900-291,900 yuan.

The Zhiji LS6 is not so much an 800V platform SUV as a quasi-900V platform model. Its maximum working voltage is as high as 875V, the peak charging power can reach 396kW, the battery life can be increased by 350+km after charging for 5 minutes, and the longest battery life of the vehicle is as long as 760km. At the same time, with the support of dual silicon carbide power modules, it can break 100 in 3.48 seconds, and the top speed can reach 252km/h, which is more powerful than Tucki G6 in terms of battery life, energy supplement and performance.

On this basis, Zhiji LS6 continues the essence of Big Brother LS7, bringing an all-star chassis lineup including four-piston fixed calipers in German mainland, Brembo FNC carbonitriding front brake disc, Pirelli Scorpion tire, and Tenneco’s Mono shock absorber. Although it is no longer adjusted by Williams team, its shock absorption and handling performance have reached at least 80%. In addition, Zhiji LS6 also has a variety of configurations such as a large screen that can be lifted and lowered, a cloud seat, and a 7.1.4 panoramic sound system. The luxurious and comfortable experience is not inferior to LS7.

However, the only regret is that the Zhiji LS6 is not a standard "quasi-900V" high-voltage platform, and only the 100kWh battery version can enjoy the ultimate power and recharge experience, which is somewhat "stingy".

Guide price: 300,800-400,800 yuan.

Although Aouita 12 was backward in the technology of three-electricity injection just after its listing, it is undeniable that its highest voltage can reach 712.8V, which is in line with the voltage range of 800V high-voltage platform (550-930V). At the same time, its comprehensive battery life can be up to 700km, and it can be increased by 200km by using 240kW fast charging for 10 minutes. Although the endurance and charging speed are almost interesting compared with the above ones, they can already lead most pure electric vehicles on the market.

Thanks to the cooperation with Huawei, Aouita 12 also has outstanding performance in driving control and intelligence. Huawei DriveONE high-voltage electric drive system can output a maximum of 425kW, and the fastest acceleration is only 3.9 seconds. The new car can also be equipped with air suspension +CDC shock absorption to further improve handling and comfort. Intelligently, Aouita 12 introduced HarmonyOS 4 locomotive, Aouita extrasensory system including 3 laser radars and Huawei ADS 2.0 intelligent driving system, with full hardware and software. Obviously, the intelligent experience will not disappoint people.

Price: estimated within 600,000 yuan.

The pre-sale of the auto show was less than 2 hours, and the order exceeded 10,000. This is the ideal MEGA of "high-speed rail on the road". Before the new car is launched, the ideal MEGA has already caused a heated discussion in the whole network with its design resembling a locomotive, ultra-low drag coefficient as low as 0.215Cd, and the largest size in its class. Although the evaluation is mixed, even Tucki X9 has been "slapped" in the face on the folding mode and safety of the third row seats, but it is a manifestation of strength to trigger an argument.

At present, it is known that in addition to its unique shape, ultra-low wind resistance and oversized size, the ideal MEGA is a four-wheel drive MPV based on an 800V high-voltage platform. The maximum power of dual motors is 400kW, the peak torque is 542N?m, and the zero acceleration takes only 5.5 seconds. In addition, under CLTC working conditions, the comprehensive endurance of the new car can reach 700km, the fast charging rate can reach 5C level, and the endurance can be increased by 500km after 12 minutes of charging. Moreover, with the help of ultra-low wind resistance, the power consumption level of the whole car is as low as 15.9kWh/100km, and the data is quite "scary". It is reported that the ideal MEGA will be listed in December this year. Are you looking forward to it?

In fact, there are more than 800V high-voltage platform models, such as G9 in Tucki, X9 in Tucki, ES in Xingtu Xingyuan, and M9 in Wenjie and SU7 in Xiaomi. It is believed that with the popularization of 800V technology, the car experience of pure electric vehicles will get better and better, and users can completely bid farewell to mileage anxiety and recharge anxiety.

The heroes behind Sichuan Airlines’ 3U8633 alternate, and them!

  On May 14th, during the flight of Sichuan Airlines, the front windshield broke, and after 40 minutes of shock, Chengdu Shuangliu Airport was successfully prepared.

  When everyone is crazy about "Captain Sally in China" Liu Chuanjian, the situation target seat and air traffic control seat of the air combat command and control center in the western theater are working hard as usual.

  Few people know that on the morning of May 14th, it was because of these "clairvoyance" and "air traffic police" that they discovered the "7700" code, which meant the mechanical failure of the aircraft, and quickly stopped more than a dozen aircraft that had slipped onto the runway, and the airspace north of the Tibet route was deployed by civil aviation, ensuring that Sichuan Airlines 3U8633 was able to take the shortest route and make a successful backup in the least time.

  Hero, Liu Chuanjian is not the only one.

  ▲ Air traffic controller Xin Xin (left) and his comrades-in-arms are at the console to check the air routes of the day. All the pictures in this article are online maps of Sichuan.

  Radar found Sichuan Airlines 3U8633 yaw.

  Descending 2000 meters a minute

  On May 14th, at 7: 08 a.m., Guan Jianke and Li Dongbo, staff officers on duty, were monitoring the air situation in and around the area of responsibility at the situation target table of the air combat command and control center in the western theater.

  ▲ Guan Jianke, the radar intelligence attendant, keeps a close eye on the screen and always keeps a high degree of vigilance to monitor the flight of various aircraft in the air.

  Suddenly, they found that Sichuan Airlines’ flight 3U8633 from Chongqing to Lhasa suddenly changed course and deviated from the route to fly south, 122km west of Shuangliu Airport on the Sichuan-Tibet route: "In less than one minute, the flight altitude dropped rapidly from 9400 meters to 7300 meters." Guan Jianke immediately informed a brigade of the Air Force radar in the relevant airspace, transferred to the first-class duty and added radar, strengthened the monitoring of 3U8633, and paid close attention to the altitude change. At the same time, notify all the duty seats at the corresponding level for collaborative disposal.

  ▲ Flight track map of Sichuan Airlines "Hero Unit" flight 3U8633 at that time.

  At 7: 10: 30, radar information showed that the secondary code of Sichuan Airlines 3U8633 had changed from 2245 showing normal flight to "7700" indicating aircraft mechanical failure. Guan Jianke immediately started the abnormal air handling procedure and informed the relevant seats at the corresponding level to coordinate the handling.

  More than ten military aircraft "stopped" in 5 minutes.

  6 minutes to release airspace for civil aviation deployment

  At 7: 11, Xin Xinmeng, the attendant who was calling to deploy military aircraft, looked up. The flashing "7700" on the screen of the air traffic control terminal of the air traffic control seat reminded him that he had been holding this position for 6 years: "Something big happened!"

  ▲ Air traffic controller Xin Xin

  The computer shows the flight number. At this time, the altitude of Sichuan Airlines 3U8633 has dropped to 7200m. Xin Xin immediately contacted the duty officer of Southwest Air Traffic Control Bureau of Civil Aviation, and learned that the front windshield of Sichuan Airlines 3U8633 was cracked and was preparing to descend to Shuangliu Airport, but the airport was unable to contact the crew: "The whole call took less than one minute, and the person who answered the phone was very anxious and spoke quickly."

  This is a battle that must be won!

  Xin Xin made emergency arrangements for related activities according to the possible areas involved in the emergency standby of Sichuan Airlines flight 3U8633, and quickly reported to the chief duty officer of the command post and the air traffic control duty officer to coordinate with ICAO to avoid the aircraft. About an hour ago, Xin Xin made a lot of phone calls. Every phone call was related to the reception and release of the military aircraft that day. He knew that at that time, more than 10 military aircraft had slipped into a runway of an air force aviation unit in the western theater to fly, and some training flights were about to take place. These military aircraft will fly to all directions in the southeast and northwest of China. Xin Xin immediately called the control attendant of a division of the Air Force Aviation: "All transfer planes and training planes in this field will take off at your command. Your tower frequency is consistent with Shuangliu Airport. Try to contact Sichuan Airlines 3U8633 by radio immediately. "

  On the ground, more than 10 military aircraft were quietly on standby on the runway of a certain air force aviation unit in the western theater. At this point, it is 7: 16.

  In the air, the air combat command and control center of the western theater released the airspace north of the Tibet route, which was used as a deployment by civil aviation flights. In this airspace, ordinary civil aircraft are forbidden. At this point, it is 7: 17.

  Three-place linkage

  Until 3U8633 is safely standby.

  At 7: 20, Xin Xin received a report from the duty officer of Southwest Air Traffic Control Bureau of Civil Aviation, and got intermittent contact with Sichuan Airlines 3U8633. He could hear the call in the air, but he could not receive the ground notification in the air. Shuangliu Airport was ready for alternate flight.

  At this time, the Southwest Air Traffic Control Bureau of Civil Aviation, a division of the Air Force Aviation in the Western Theater, and the air combat command and control center in the Western Theater are all trying their best to escort Sichuan Airlines 3U8633.

  Xin Xin stared at the screen and watched the flying height of the plane drop a little: "Get closer to the ground, and my heart will fall a little." In just a few minutes, Xin Xin’ s heart turned around. "If you don’ t put oil, is it safe to land?" "How does civil aviation command landing?" "Can you land safely?"

  As an air controller, he knew that the captain was at an altitude of more than 9,000 meters. If the glass cracked, it was impossible to hear the ground call: "If the cockpit loses pressure, the human body may lose consciousness at the first time. Usually we train, the cockpit above 4000 meters needs to be completely closed, and we must wear an oxygen mask. "

  At 7: 25, Xin Xin once again called the Southwest Air Traffic Control Bureau of Civil Aviation, requesting a timely report on the alternate situation.

  The phone suddenly rang, and Xin Xin heard the good news at the speed of seconds: "Sichuan Airlines 3U8633 successfully prepared!"

  Source: Sichuan Online, Comprehensive People’s Network (ID: people _ rmw)

Latest release! It is related to the 2024 senior high school entrance examination.

The city’s junior high school graduates in 2024

The information of entrance examination for physical education has been released.

Let’s take a look at what changes have taken place.

one

Exam object

All the fresh and previous junior high school graduates who apply for ordinary high schools, secondary vocational schools and five-year higher vocational colleges in our city must take the physical education examination for junior high school graduates in 2024.

two

Examination time

From April to May, 2024, the specific time will be arranged by each county and city.

three

Examination items

Male and female students will take three exams each, and there will be mandatory and optional exams. In 2024, a one-minute skipping exam will be added.

1. Required items: 1000 meters for boys and 800 meters for girls.

2. Selection of test items: Candidates can choose two items from eight items (only one item can be selected for the "three big balls").

Boys: 50-meter running, standing long jump, throwing solid ball, pull-ups, skipping rope, basketball dribbling, football dribbling and volleyball padding.

Girls: 50-meter running, standing long jump, throwing solid balls, one-minute sit-ups, skipping rope, basketball dribbling, football dribbling and volleyball padding.

four

Test score

In 2024, junior high school graduates entered the physical education examination, with a full score of 60 points, which was included in the total score of the senior high school entrance examination. Among them: 25 points for a compulsory item; Choose two items, each with 17.5 points, totaling 35 points.

The starting point of each individual performance test is 0.

five

Detailed rules

Yichun city junior high school graduates in 2024

Rules of entrance examination for physical education

1. 1000-meter running and 800-meter running

(1) Site setting and equipment specifications

The venue is set in a closed 400-meter track and field with six or more circular runways. The marking lines required for the examination are clear, and obvious markers must be set at the starting line and the finishing line.

(2) Test methods

The guide will take the candidates to the examination venue in groups for identity confirmation (photo of the handheld education examination card is compared with my appearance) and check-in. The guide will take the candidates to the starting point in groups, and the number of candidates in each group will not exceed 20. Candidates will wear number clothes with timing chips as required, and the testers will check the candidates’ numbers one by one and enter the examination procedure after confirming that they are accurate.

Adopt a standing starting line and an arc starting line, regardless of the runway after starting; Follow the track and field rules of overtaking on the right. During the examination, the examinee has no foul phenomenon, and the record is valid.

Each candidate has only one chance to take the exam. Candidates can only take a make-up test on the same day with the consent of the examiner because of the foul of others or accidental fall during the test. Those who still violate the rules, the score will be 0. Candidates should complete the race within 7 minutes, and the time is recorded in minutes and seconds. Less than 1 second is not included in the score. If the student fails to finish the race within 7 minutes, the guide will take the candidate off the track, and the student’s score will be marked as "overtime", with a score of 0. When the exam is fouled, the result will be invalid.

(3) Foul behavior

1. Before starting, any part of the body touches or crosses the starting line;

2. Step into the inner edge of the runway during running;

3. Run in, push, pull and stop others from running in;

4. Run in by others, or run in with the help of others;

5. During the examination, take out the timing chip of the clothes.

(4) Matters needing attention

Candidates wear sneakers with rubber soles during the exam, and they are not allowed to wear spikes or leather shoes.

Second, 50-meter run

(1) Site setting and equipment specifications

There should be enough buffer space for several runways, and the ground should be flat soil or plastic ground. The marking lines required for the examination should be clear and marked on the corresponding passes. The starting line and the finishing line should be clearly marked. The system should meet the requirements of track and field competition rules.

(2) Test methods

The guide will take the candidates to the examination venue in groups for identity confirmation (photo of the handheld education examination card is compared with my appearance) and check-in. Candidates stand behind the starting line to prepare and listen to the sound of the equipment to start. Adopt a standing start. The instrument gives a prompt sound (each in position … about 2-3 seconds … gunshot prompt sound), and the candidates start. After reaching the finish line, confirm the results in the order of passes.

Candidates have only one chance to take the exam. Candidates can only take a make-up test on the same day with the consent of the examiner because of the foul of others or accidental fall during the test. Those who still violate the rules, the score will be 0.

(3) Foul behavior

Rush to run and cross the road during the exam.

(4) Matters needing attention

Candidates wear sneakers with rubber soles during the exam, and they are not allowed to wear spikes or leather shoes.

Third, the standing long jump

(1) Site setting and equipment specifications

Examination venues and equipment should be arranged on a flat ground. Use a special standing long jump tester.

(2) Test methods

The guide will take the candidates to the examination venue in groups for identity confirmation (photo of the handheld education examination card is compared with my appearance) and check-in. Candidates stand on the jumper and prepare for the exam. Both feet jump at the same time. The landing point must be in the test area, and the closest point of the body touching the ground from the jumper is the test score. No run-up or step jump is allowed.

Test twice in a row, and the electronic instrument automatically selects and stores the best performance record.

Candidates violate the rules in the exam, and the results are invalid; Those who have fouled twice and failed in the exam can only increase their chances once; Those who still violate the rules, the score will be 0.

(3) Foul behavior

1. Step on the line, run-up, step-by-step or jump.

2. After the test is completed, retreat or go out of the sensing area from the side, which is judged as a foul and the jumping result is invalid.

(4) Matters needing attention

After a single take-off and landing, you must go forward out of the test area and not backward, otherwise the test results may be affected.

Fourth, throw a solid ball

(1) Site setting and equipment specifications

A flat land 20 meters long and 5 meters wide; All counties and cities use solid balls of the same brand and specification, and the diameter of the ball is 14~14.5 cm; Weight: 2 kg (20 g) for both boys and girls; The sphere is cast by raw rubber; There must be no rolling animals in the ball. Use special laser rangefinder.

(2) Test methods

The guide will take the candidates to the examination venue in groups for identity confirmation (photo of the handheld education examination card is compared with my appearance) and check-in. Candidates stand behind the starting line to prepare for the exam. Before throwing, put your feet back and forth or left and right, and your body is facing the throwing direction. Raise the ball with both hands above your head and then lean back, with your shoulders parallel to the starting line, and throw the ball forward with both hands in situ; When the ball is released, the shoulders must be parallel to the starting line; Before the ball hits the ground, feet are not allowed to step on the line or throw it across the line, and all parts of the body are not allowed to touch the line.

Test twice in a row, and the rangefinder automatically selects and stores the best performance record.

Candidates violate the rules in the exam, and the results are invalid; Those who have fouled twice and failed in the exam can only increase their chances once; Those who still violate the rules, the score will be 0.

(3) Foul behavior

1. Failing to finish throwing from the original place, resulting in run-up, etc.

2. When testing, the foot steps on the line or any part of the body touches the ground in the landing area before the throwing line;

3. Throwing the upper limbs of the body to the throwing area or with one hand.

(4) Matters needing attention

1. Candidates wear sneakers with rubber soles during the exam, and they are not allowed to wear spikes or leather shoes.

2. At the moment when the solid ball is released, the foot can be pushed to the ground and off the ground at the same time (only at the moment of release). If the subject throws the ball with both feet in front and back, the back foot can take a step forward at the same time, but not step on the line.

Five, pull-ups (male)

(1) Site setting and equipment specifications

On the high horizontal bar, the horizontal bar used in the exam must meet the relevant requirements; According to the actual situation, venues with different heights can be set up for candidates to choose from; The laying of ground materials under the horizontal bar must fully consider the safety of candidates’ landing, and soft sand and gymnastics mats can be used.

(2) Test methods

The guide will take the candidates to the examination venue in groups for identity confirmation (photo of the handheld education examination card is compared with my appearance) and check-in. Candidates line up in a column in the specified area according to the test order. After hearing the number, the examinee jumps under the bar, holding the bar with both hands, hanging with both hands about shoulder width into a straight arm, and starting to do the first action after the body is in a static state; Bend the arm and pull the body up until the chin exceeds the upper edge of the bar, and complete it once after restoring the straight arm suspension; If the action does not reach this specification, it will not be counted; The examination time begins with holding the bar with both hands and ends with both hands off the bar. During this period, if the time interval between the two actions exceeds 10 seconds, the examination will automatically end. Candidates’ scores are counted according to the number of successful completion. Each candidate has only one chance to take the exam.

During the examination, the candidate commits a foul, regardless of the number of fouls, but can continue the examination.

(3) Foul behavior

1. Hands are not holding the horizontal bar;

2. Not starting from the static action;

3. Between the two movements, the arm is not fully straightened;

4. When the action is completed, the chin does not exceed the bar surface.

(4) Matters needing attention

When pull-ups, the body must not swing greatly, nor can it be propped up with other additional actions.

Six, 1 minute sit-ups (female)

(1) Site setting and equipment specifications

The venue is set on a flat ground, and candidates complete the test on instruments and equipment.

(2) Test methods

The guide will take the candidates to the examination venue in groups for identity confirmation (photo of the handheld education examination card is compared with my appearance) and check-in. Candidates lie on their back on the test instrument, with their hands and fingers crossed behind their heads, and at the same time, their arms are open, and the back of their hands and arms are touching the mat; Put your feet firmly, bend your knees, the big legs are at right angles, and your legs can be slightly separated; When sitting up, your elbows must touch or exceed your knees; When lying on your back, your shoulder blades must touch the pad. No external assistance is allowed during the test. Count the number of actions that the candidate completes in one minute that meet the standard. Each candidate only takes the test once.

Candidates have committed a foul, and the sit-ups done during the foul are not counted, but candidates can continue to take the exam.

When the exam is fouled, the result will be invalid.

(3) Foul behavior

1. When sitting up, the elbows do not touch or exceed the knees;

2. When lying on your back, the scapula did not touch the pad;

3. During the examination, the buttocks are off the mat.

(4) Matters needing attention

1. If it is found that the subjects sit up with the strength of elbow pads or hip ups and downs, it will not be counted this time.

2. Subjects’ feet must be placed on the mat.

Jump rope for seven or one minute.

(1) Site setting and equipment specifications

The examination venue is set on a flat ground, and intelligent instruments are used for testing. Candidates are tested in the arranged venue in groups. The skipping rope for the examination is special, and the handle contains timing and counting chips. Candidates are not allowed to use their own skipping rope, and there are several candidates in each group.

(2) Test methods

The guide will take the candidates to the examination venue in groups for identity confirmation (photo of the handheld education examination card is compared with my appearance) and check-in. Candidates need to use the special skipping rope at the examination site, and the guide will take the candidates to the skipping field in groups. Candidates will stand in the designated area with signs as required and take the corresponding skipping equipment. Candidates will adjust the length of skipping rope to an appropriate length. After tying the shoelaces and preparing, the tester will check the candidates’ numbers one by one and enter the examination procedure after confirming that they are accurate.

Candidates listen to the instrument’s prompt tone of "Referee Ready, Athlete Ready, 5, 4, 3, 2, 1, Jump" to take the test. Candidates jump alternately with their feet or one foot in the test area, and each jump is valid once, and the test instrument automatically counts the time.

When the exam is finished, stand in the same place. Candidates can check the exam results at the right handle. After the equipment operator prompts them to shut down, gently put the rope on the exam position and exit in an orderly manner.

Candidates have only one chance to take the exam. If the examinee’s shoelaces fall off or are influenced by others during the examination, and the force majeure factors such as rope winding are confirmed by the invigilator, he can apply for a make-up jump opportunity.

(3) Foul behavior

1. Hands are not used to shake;

2. Jump and shake more;

3. Jumping out of the prescribed area and affecting others;

(4) Matters needing attention

1. Skipping rope and tripping during the test, except this time without counting, should be continued.

2. After the exam, candidates will lightly put the skipping rope to the designated position.

3. The skipping scene for the exam has been provided, and candidates are not allowed to bring their own skipping rope into the examination room.

Eight, basketball dribbling

(1) Site setting and equipment specifications

The court is set in the basketball court or on a flat plastic court. The setting requirements are as follows:

It is 20 meters long and 7 meters wide. 5 meters before the starting line, sign posts are set up, with 5 rows, 2 in each row; The distance between each row of sign poles is 3m, the distance between the center points of two sign pole bases in the same row is 1m, and the distance from the same side edge line is 3m. The starting area is 1 meter in the middle of the starting line. The setting method is as shown in the figure:

The height of the marker post is not less than 1.2 meters, the size of the test ball is No.6 basketball (its weight is 510~567g and its circumference is 724~737mm), and the air pressure in the ball meets the requirements of basketball competition rules.

(2) Test methods

The guide will take the candidates to the examination venue in groups for identity confirmation (photo of the handheld education examination card is compared with my appearance) and check-in. After hearing the number, candidates stand at the starting position of the starting (finishing) line with the ball and make preparations for departure. After giving the order, the examinee can move his feet and dribble the ball in the direction shown by the arrow in the figure. In the process of dribbling, if the candidate temporarily loses control of the ball, but the ball does not leave the test site, the candidate can pick it up by himself and return to the place where the ball is out of control to continue dribbling, and the timing will not stop. Candidates and the ball both return to the starting (final) line, and the timing stops. Each person tested twice and recorded good results.

Test scores are recorded in seconds, accurate to 1 decimal place (0. 1 second), and enter 1 when the second decimal place is not "0".

Candidates violate the rules in the exam, and the results are invalid; Those who have fouled twice and failed in the exam can only increase their chances once; Those who still violate the rules, the score will be 0.

(3) Foul behavior

1. Not starting from the designated area;

2. run away when you leave;

3. Both hands touch the ball at the same time during dribbling;

4. The dribbling height exceeds the examinee’s shoulder;

5. Body parts below the knee touch the ball;

6. Violations that are not allowed by other rules such as "wrist flip";

7. Leakage around the sign post;

8. Knock down the sign post;

9. During the examination, people or balls leave the test area;

10. When passing the finish line, people and balls are separated (candidates must touch the ball with one hand or both hands at the moment when they reach the finish line).

Nine, football dribbling

(1) Site setting and equipment specifications

The field is set on the flat ground in the middle of the track and field or on an independent football field. The surface is natural or artificial lawn (not smooth hard ground), and the fields are independent from each other to avoid mutual interference during the examination. The setting requirements are as follows:

It is 30 meters long and 10 meters wide, and obvious marking lines are set around the site. Sign poles are set up 5 meters before the starting line. The distance between the sign poles and the side lines on both sides is 5 meters, with a total of 5 poles, and the distance between the poles is 5 meters. One meter in the middle of the starting line is the departure area for candidates. The setting method is as shown in the figure:

The height of the marker post is not less than 1.2m, the size of the test ball is No.5 football (its weight is 396~453g, and its circumference is 680~710mm), and the air pressure in the ball meets the requirements of football competition rules.

(2) Test methods

The guide will take the candidates to the examination venue in groups for identity confirmation (photo of the handheld education examination card is compared with my appearance) and check-in. After hearing the number, candidates will transport the ball to the starting area behind the starting line and make preparations for departure. After giving the order, the examinee dribbles forward and winds the pole in turn; After the ball passes the last post, the examinee touches the ball at least once and dribbles through the finish line; When both the man and the ball have crossed the finish line, the timing stops. Each person tested twice and recorded good results.

Record the test results in seconds, accurate to 1 decimal place (0. 1 second), and enter L when the second decimal place is not "0".

When the exam is fouled, the score will be invalid; Those who have fouled twice without results can only have one more chance; Those who still violate the rules will get 0 points for this score.

(3) Foul behavior

1. Not starting from the designated area;

2. run away when you leave;

3. handball;

4. Leakage around the sign post;

5. Knock down the sign post;

6. After the ball passed the last post, before reaching the finish line, the foot did not touch the ball;

7. Failing to complete the whole route as required;

8. During the test, the person or ball leaves the test area.

X. Volleyball cushion

(1) Site setting and equipment specifications

The venue is set on a flat and solid ground, and qualified test sites are encouraged to set the venue in the gymnasium. The setting requirements are as follows:

The length and width are 3 meters, and obvious marking lines are set around the site; A marker for judging the height of the cushion ball is set on the periphery of the site, and the vertical projection of the marker on the ground is 0.5 meters away from the sign line on the same side; The height of the marker should be set by considering the factors such as the counting method of instruments and equipment, the diameter of volleyball and so on to ensure that the height meets the requirements; Other matters needing attention in marker setting are determined according to the actual conditions of the selected instruments and equipment. The test sites for boys and girls should be set up separately.

The test ball is volleyball (soft volleyball is not allowed), its weight is 230~270g, its circumference is 650~670mm, and the air pressure in the ball meets the requirements of volleyball competition rules.

(2) Test methods

The guide will take the candidates to the examination venue in groups for identity confirmation (photo of the handheld education examination card is compared with my appearance) and check-in. Line up in a single column in the specified area according to the test order.

After hearing the number, the examinee enters the test area and throws the ball in place. After the first ball cushion is successful, the timer starts, and the individual continuously cushions the ball with both hands, requiring the correct hand shape, accurate hitting position and the specified height.

Each test should last no more than 1 minute. Each person takes the test twice, and records the better one.

If the cushion ball does not exceed the time limit, the ball lands or commits a foul, and the test is over; In case of overtime, the test will automatically end after the specified time. The height of the boys’ cushion ball (from the ground to the bottom of the ball) is not less than 2.24 meters, and the girls are not less than 2.00 meters. Only when the method is correct and the height meets the requirements can the cushion ball be counted. Count the number of cushion balls.

When the candidates take the exam, the ball touches the marker, and the consequences are borne by the candidates; In case of foul behavior, when the test is over, the number of cushion balls shall be based on the number recorded by instruments and equipment at the time of foul.

(3) Foul behavior

1. Touch the ball by passing the ball;

2. Step on the marking line or leave the test area.

(Slide down to see more)

six

grading standards

1. Strictly implement the grading standards for junior high school students’ physical health standards (revised in 2014).

2. Throwing a solid ball and skipping rope for one minute shall implement the grading standards of related items in junior middle school grade three in the National Physical Health Standard for Students promulgated and implemented by the Ministry of Education and the State Sports General Administration in 2007.

Source: Yichun Publishing

Editor in charge: Yuan Yonghua

Editor: Ao Juan

Issued by: Liu Ximing

Dear citizens:

Gao ‘an is creating a provincial civilized city! Please regulate parking, courteous to pedestrians, standardized operation, and no smoking in public places … Gaoan is more civilized because of you!

Help me order one

and

Share it with more people ↓↓↓↓ Continue to slide to see the next one.

Latest release! It is related to the high-quality Gao’ an in the 2024 senior high school entrance examination.

High-quality and high-praise sharing, reading and writing messages, sliding up to see the next one.

Original title: "The latest release! It is related to the 2024 senior high school entrance examination.

Read the original text

How to do cross-border e-commerce for your own products? What cross-border e-commerce is suitable for individuals?

How to do cross-border e-commerce for your own products? What cross-border e-commerce is suitable for individuals?

In China, the development of the Internet has made domestic e-commerce increasingly prosperous, saturated and increasingly fierce. Under the background of such a domestic e-commerce market environment, many sellers have turned their attention to overseas cross-border e-commerce, ranging from the United States to Southeast Asia, the Middle East and Africa. What kind of cross-border e-commerce is suitable for individuals? How to do cross-border e-commerce with your own products? I will introduce it to you today.

There are only a few mainstream platforms for cross-border e-commerce. What we are mainly talking about here is cross-border export, that is, selling products from China to foreign countries.

Most people do wish, Amazon and AliExpress. Compared with other platforms, these three platforms are relatively stable, and the operating system is relatively mature after years of development. What are the characteristics of different platforms? We made a comparison and said why we recommend you to be an Amazon platform.

For small and medium-sized sellers who want to cross the border, they must first know the application threshold of mainstream cross-border e-commerce platforms. Amazon platform and wish platform can be applied by individuals or companies; Individuals on the AliExpress platform cannot apply, but only in the name of the company.

Amazon’s registration threshold is also lower.

The Amazon platform can be registered with a credit card that supports US dollars, and the wish platform needs the URL address of the applicant’s store in other e-commerce platforms; AliExpress platform needs more materials, including ID card, company business license, tax registration certificate, bank account opening and address proof materials.

Of course, since it is selling goods, more sellers are concerned about the billing cycle. Amazon usually issues orders in 7-15 days, and novice sellers can do it in two weeks from uploading products to issuing a single order, especially in the discount season of the fourth quarter. As long as online optimization is done, the order will be faster. From this aspect, we can also see that the traffic of Amazon platform is very large, and large traffic can ensure that small sellers also have sales.

Wish platform is 15-20 days for billing. The competition of AliExpress platform is fierce. If it is a novice seller, the order may be in the foreseeable future.

The following is the introduction of mainstream platforms:

At present, the four mainstream cross-border e-commerce platforms are Amazon, wish, ebay and AliExpress.

1) Amazon

At present, the platform has the highest sales volume and the highest profit is Amazon platform. Amazon firmly occupies the mid-to-high-end market of cross-border e-commerce. It is best to have better supplier cooperation resources when choosing Amazon. The quality of suppliers needs to be very stable, and it is best to have strong research and development capabilities. To be Amazon, products are king.

2)ebay

Ebay is the oldest cross-border e-commerce platform, just like Amazon. At present, there are more and more sellers on ebay who rely on overseas warehouses to make big goods. Of course, ebay is still far ahead of Amazon in some categories represented by auto parts and geek modification and tool workbench. For the choice of eBay, there should be regional advantages of products, such as the target market of products in Europe and the United States. EBay is relatively simple to operate with little investment, and people with certain foreign trade resources can try it.

3)wish

It rose in 2013. Wish is the platform with the simplest background operation, the easiest to use and the lowest threshold among the four platforms. Sellers must have low prices to have an advantage.

4) AliExpress

Amazon is firmly occupying the high-end consumer groups in e-commerce. Because AliExpress is inherently weak in logistics, the income of natural consumers is relatively low. If your target market and your products are mainly oriented to Russia, then AliExpress is your best choice.      

In addition, to do cross-border e-commerce, there are not only third-party platforms such as Amazon, eBay and AliExpress. For a seller, it may benefit more than choosing a third-party platform. E-commerce self-built station allows sellers to have more free control and can accurately divide user groups. At the same time, it can also be linked with online stores on third-party platforms to accumulate its own brand effect.      

The next step in choosing a good platform is to tap the sub-categories and analyze the target market. Some products sell well in China, but may not sell well abroad. This is the first hurdle that sellers have to face. Don’t think that doing e-commerce operation routines is the most important thing. These are icing on the cake, and products are the core competitiveness. Selection includes positioning, positioning itself and positioning customers. With positioning, you know which style, price and category of products you want to go to, which is the most basic.

A small amount of stocking water, find the explosion and keep up in time. If you can’t find the explosion, you can’t talk about continuous sales. Looking for explosions, we must also analyze the data of stores and product operations. Amazon background database is perfect, the key is to be able to read and analyze.

Continuous drainage paves the way for sales. It’s not enough just to put the product on, and drainage is another big difficulty. As a newcomer to Amazon, have you ever been exposed to overseas social platforms? How to use social platforms to bring popularity to stores? How to cooperate the drainage method with the promotion method to maximize the product income is a problem that sellers need to consider.

Seemingly simple steps, you will know when you actually do it, and it is better to have someone to guide you. Especially with an experienced tutor to guide you, you can take many detours less. After all, we can’t fight alone in this era, and we need a place to exchange experiences with each other.

Take Amazon, a cross-border e-commerce platform. In fact, if you don’t make many products, you can send them directly to the FBA warehouse in the United States after you choose a product. If there is an order, the warehouse in the United States will directly help you deliver the goods. You just need to pay attention to your own product inventory. The background data shows that the product inventory is almost sold out, so you need to replenish it in time according to the sales situation. Secondly, you need to check your email regularly. If there are any emails, take time to reply. Generally, there are few emails in newly opened stores.

Related articles: What are the advantages of cross-border e-commerce erp? Introduction of Easy-to-use Cross-border E-commerce Software

After the epidemic, how to change the disease control reform?

After every major epidemic, there will always be a lot of reflection, which is the reason for the continuous progress of mankind, also known as learning from a pit. After SARS in 2003, China’s disease prevention and control system was given an opportunity to upgrade: a nationwide unified network direct reporting system for infectious diseases was established, and a case of "unexplained" pneumonia was specially designed in order to avoid the failure of reporting some diseases that have not been clearly defined for the time being; Established the Emergency Regulations for Public Health Emergencies, which stipulated a four-level emergency response mechanism; In many places, the health and epidemic prevention stations were renamed as centers for disease prevention and control, which clarified the establishment standards and improved the administrative level of the units … However, at the end of last year, the sudden COVID-19 epidemic gave us a real test of the achievements of the disease control system construction in the past 17 years, and the results were not satisfactory, exposing many problems.   

What are the main problems?   

(1) The direct reporting system of epidemic situation, which has been built with huge investment, is not running smoothly. 

(B) In the cry of strengthening the construction of disease control system, the number of disease control professionals has decreased compared with 2003. According to the Statistical Bulletin on the Development of Health Care in China in 2019, there are 188,000 people in the Center for Disease Control and Prevention, including 140,000 health technicians, which are 20,000 and 19,000 fewer than in 2003 respectively. 

(C) CDC system, people floating, brain drain accelerated. In June, 2019, at a seminar held in the State Council Development Research Center, Ceng Guang, chief epidemiologist of China Center for Disease Control and Prevention, said: Due to various problems accumulated for a long time and the further decline in income due to recent policy reasons, people in the disease control system are floating and the brain drain is accelerating. In the past three years, there have been as many as 100 young and middle-aged backbones lost from the National Center for Disease Control and Prevention alone, and the brain drain from disease control institutions in some places may be more serious. 

(4) The number of disease control institutions has decreased, and some places have even merged disease control institutions in the name of reform. In 2003, there were 3,584 national centers for disease control and prevention (epidemic prevention stations), and by the end of 2019, there were only 3,403 centers, a decrease of 181. In July 2018, Liaoning Province issued the red-headed document "Optimization and Integration Plan of Provincial Public Welfare Institutions", which reorganized and integrated the provincial and municipal disease control and health supervision departments. After the integration, only provincial disease control remained, and disease control and health supervision institutions below the provincial level were integrated and will no longer exist. 

(5) The county-level CDC is beset with "diseases" and its business development is stagnant and retrogressive. Professional and technical personnel are in short supply, and there is a serious shortage of staff; Aging infrastructure and insufficient investment; The channel of working funds is single; Lack of incentive and restraint performance appraisal system, lack of enthusiasm for disease control cadres.    

Reform is imperative! How to change it?   

Gao Fu suggested.   

According to the report of China Youth Daily on May 27th, Gao Fu, director of China Center for Disease Control and Prevention, who attended the third session of the 13th Chinese People’s Political Consultative Conference, called for speeding up the reform of the disease control system. He proposed to strengthen the core competence of disease control institutions and improve their "professional voice".   

He said that the new pneumonia epidemic has exposed the shortcomings of China’s major epidemic prevention and control system and public health system construction. As the main force of epidemic prevention and control, CDC has not fully played its role in early warning and monitoring, epidemiological investigation, and the proposal and implementation of prevention and control measures, and is faced with problems such as insufficient capacity, professional voice can not meet the requirements of modern disease prevention and control management and the increasingly diverse needs of the masses. The existing problems include: the CDC’s "unequal power and responsibility", the responsibility to put forward prevention and control strategies, the lack of decision-making power and discourse power to deal with the epidemic, and the "disconnection between administrative decision-making and technical strategies", and the CDC experts can only exercise the right of suggestion and cannot participate in decision-making; There is only a relationship of guidance and guidance between the superior and the subordinate disease control institutions, which makes it difficult to form an effective joint force in dealing with the epidemic situation. The division of labor and cooperation mechanism between disease prevention and control institutions and medical institutions is not perfect.

The administrative functions of disease prevention and control are decentralized. The disease prevention, control and emergency functions of the national health administrative department are scattered in many departments, such as disease prevention and control bureau, medical management and emergency office. There is a lot of interference in the details of prevention and control, and there is no comprehensive coordination. According to Gao Fu, from 2010 to 2018, the total number of CDC staff at all levels in China decreased by 3.9%, among which the number of professional technicians mainly practicing doctors decreased by 10.8%.

In terms of funds, the share of medical and health expenditure of CDC decreased from 2.9% to 2.4%. He stressed that the key to the reform of the disease prevention and control system "is not whether it has administrative power, but that the technical work is not subject to administrative intervention and maintains its independent technology and authority." To this end, he suggested clarifying the responsibilities of the administrative department and the technical department.

According to the law, CDC has the right to formulate and publish prevention and control strategies and technical plans, and is responsible for monitoring, investigating, handling, early warning and evaluating the epidemic situation. He suggested, "Give the CDC decision-making power in the field of professional affairs and reduce the micro-management and direct management of the CDC by the health administrative department. Explore the establishment of a mechanism for reporting public health work and major issues directly to the leaders in charge of the government, and directly release epidemic information with the authorization of the government. " In addition, he suggested strengthening the awareness and ability of coordination, strengthening the management of higher-level disease control institutions to lower-level disease control institutions, implementing vertical business management of major public health service projects under the jurisdiction of the central government, and strengthening the national disease control system. On the afternoon of June 2nd, General Secretary of the Supreme Leader presided over a symposium of experts and scholars and delivered an important speech. He emphasized that the disease prevention and control system is an important guarantee for protecting people’s health, ensuring public health safety and maintaining economic and social stability. We should base ourselves on more accurate and effective prevention, and intensify reform in rationalizing the system and mechanism, clarifying the functional orientation, and improving professional ability.

It is necessary to establish a stable investment mechanism for public health undertakings, improve the basic conditions for disease prevention and control, and improve public health services.

It is necessary to optimize and improve the function setting of disease prevention and control institutions and establish a division of labor and cooperation mechanism linked up and down.

It is necessary to strengthen the capacity building of national disease prevention and control institutions and strengthen their technology, ability and talent reserve. It is necessary to improve the linkage mechanism between disease control institutions and urban and rural communities, strengthen the disease prevention responsibilities of township hospitals and community health service centers, and consolidate the grassroots foundation of joint prevention and control.

It is necessary to innovate the coordination mechanism of medical care and prevention, and establish a mechanism of mutual restriction between personnel communication, information communication, resources communication and supervision and supervision.

It is necessary to strengthen the construction of disease control talent team, establish a talent training and use mechanism that adapts to the modern disease control system, and stabilize the grassroots disease control team.

It is necessary to build a number of high-level public health colleges and focus on cultivating talents who can solve practical problems such as pathogen identification, epidemic situation research and transmission law research, on-site epidemiological investigation and laboratory testing.

It is imperative to strengthen the ability of early monitoring and early warning, improve the monitoring system of infectious diseases and public health emergencies, improve the monitoring mechanism of unexplained diseases and abnormal health events, improve the sensitivity and accuracy of evaluation and monitoring, establish a multi-point trigger mechanism of intelligent early warning, improve the multi-channel monitoring and early warning mechanism, and improve the ability of real-time analysis and centralized judgment.

It is necessary to strengthen the construction of laboratory testing network and improve the ability of infectious disease detection. It is necessary to establish a collaborative monitoring mechanism between public health institutions and medical institutions, give play to the role of grass-roots sentinel, and achieve early detection, early reporting and early disposal.

It is necessary to improve the response plan system for public health emergencies, set up health emergency teams by classification, and cover the fields of situation judgment, epidemiological investigation, medical treatment, laboratory testing, community guidance, and material deployment. It is necessary to strengthen the knowledge reserve and training exercises of grassroots health personnel and enhance the ability of pre-disposal. It is necessary to carry out in-depth publicity and education on health emergency knowledge, and improve the people’s awareness of public health emergencies and their ability to prevent self-help and mutual aid.

Party committees and governments at all levels should establish regular research and deployment of health and health work mechanisms such as prevention and control of major epidemics, so as to ensure clear instructions, orderly systems, smooth implementation.

Hubei exploration   

On June 10th, the Seventh Plenary Session of the 11th CPC Hubei Provincial Committee was held in Wuhan. The meeting discussed the Opinions of Hubei Provincial People’s Government on Promoting the Reform of Disease Prevention and Control System and Public Health System, and decided to take the lead in domestic exploration, plan the reform of medical and health system as a whole, systematically reshape the public health system, and improve the system and mechanism of major epidemic prevention and control. Ying Yong, secretary of Hubei Provincial Party Committee, attended the meeting and delivered a speech. He pointed out that the prevention and control of the epidemic situation reflected the problems of imperfect network, unclear functions and separation of medical care and prevention in our province.

It is necessary to reform the disease control system in accordance with the unified arrangements of the CPC Central Committee. Straighten out the system and mechanism, clarify the functional orientation, and enhance the professional ability. Strengthen the administrative functions of disease control institutions, implement the responsibility of supervision and supervision, and the main person in charge of disease control institutions is also a member of the health department at the same level. 

Explore and promote the "first-class security and second-class management", implement the "two permits" in detail, allow disease control institutions to break through the current wage control level of public institutions, allow medical and health technical services to be provided on the basis of completing approved tasks, and further stimulate the endogenous motivation of disease control institutions. Strengthen the construction of disease control talents. Disease control institutions should strengthen monitoring and early warning functions, and effectively strengthen the construction of hardware facilities and infectious disease detection capabilities. The coordination of medical care and prevention should be the top priority.

Try out the system of "chief public health officer" in the health department. Formulate a list of public health responsibilities, improve public health service projects, and innovate the coordination mechanism between disease control institutions and medical institutions around the establishment of a mechanism of mutual restraint between personnel communication, information communication, resources communication and supervision and supervision. It is imperative to enhance early monitoring and early warning capabilities. The premise of epidemic monitoring and early warning is that the sources of epidemic information are unblocked and data are shared openly. It is necessary to improve the monitoring system of infectious diseases and public health emergencies, and establish a multi-point trigger mechanism of intelligent early warning to achieve early detection, early reporting and early disposal. 

Lao Xu suggested.   

(a) the implementation of epidemic reporting according to law, reduce human intervention, give full play to the state invested heavily in the establishment of the network is said to be relatively advanced epidemic reporting system. (two) strengthen the training of disease prevention and control professionals. First of all, we should plan the disease prevention and control system and the construction of talent team from the strategic height of national long-term stability. Huang Qifan once suggested that the training of public health and epidemic prevention talents must be expanded in scale and improved in quality, and double-class universities should be encouraged to set up high-quality public health colleges, rather than only medical colleges to set up this major; Build a national key university of public health and epidemic prevention, such as "China University of Public Health", pay equal attention to teaching and scientific research, cultivate high-end public health and epidemic prevention talents for the country, and concentrate on establishing a research system and laboratory system of public health and epidemic prevention, gather high-end scientific and technological talents from all over the world, and undertake cutting-edge research work in the field of public health in China and even the world. 

(3) In deepening the reform of the medical and health system, we should make overall plans for the reform of the disease control system. In particular, it should be noted that the disease control system can only be strengthened, not weakened; The talent team can only be steadily strengthened, and it cannot be floating and brain drain; The reform of disease control can only take a more professional road, establish the authority of disease control because of its specialty, and increase the right to speak in decision-making, instead of taking an administrative road. Disease prevention and control should be incorporated into the national security strategy, and an elite team that is professional, authoritative and trusted by all parties should be established, rather than an administrative grease. 

(four) pay close attention to the capacity building of grassroots disease control institutions. Create the first line of defense for disease prevention and control.  

Chengdu announces the sixth batch of municipal intangible cultural heritage projects.

On April 15th, the list of the sixth batch of representative municipal intangible cultural heritage projects in Chengdu was officially announced. This time, a total of 39 projects were selected as municipal intangible cultural heritage, among which there were many traditional folk activities loved by citizens, such as Chengdu Temple Fair of Wuhou Temple, You Xi Shen Fang, Dragon Boat Festival, Spring Festival in West Sichuan, and traditional skills such as cooked oil and sea pepper, which gathered the collective memory of old Chengdu people.

The sixth batch of Chengdu-level intangible cultural heritage announced this time is divided into seven categories, including traditional music, traditional dance and traditional skills. In 39 projects, Qiang flute performance and production skills, as well as Wuhou Temple Chengdu Temple Fair, Youxi Shenfang and other folk customs were selected. However, the most noteworthy thing in this list is that 17 items are all traditional techniques, including traditional production techniques such as Pujiang bean curd, Tianhui bean curd, Xindu Osmanthus Jelly, Chengdu Third Artillery and even Chengdu hot pot. In the future, these protected cooking techniques will ensure that they will always be "familiar recipes and familiar tastes". (Reporter   Wu Xiaoling)

High fever to 40℃! Influenza has entered a high incidence period, how to prevent it scientifically →

near future

Influenza, mainly influenza A, has entered a high incidence period.

Two weeks in a row

Pediatrics in major hospitals in our city have seen a peak of medical treatment.

The topic of influenza has attracted much attention.

So, how should children be prevented and treated scientifically?

it is reported

Recently, the number of influenza patients in outpatient and emergency departments has increased greatly.

Most of them are infected with influenza A virus.

And the patients are mainly children.

According to doctors, influenza A is an acute respiratory infectious disease. Once children are infected, they are prone to high fever with a body temperature of 39℃ to 40℃. The incubation period of influenza A is very short, usually only 1 to 3 days.

Doctors reminded that vaccination with influenza vaccine can significantly reduce the risk of serious complications. The most important thing to prevent influenza is to maintain good personal hygiene habits, including wearing masks, washing hands frequently, and often ventilating, and trying to avoid going to crowded places during the flu season. Once you have symptoms such as high fever, chills, fatigue, muscle pain, loss of appetite, you must seek medical attention in time.

The National CDC also reminded

There is a risk of COVID-19 epidemic rebounding in winter and spring, and the national influenza epidemic is still at a high level. It is predicted that during the Spring Festival, most parts of the country will still face the risk of alternating or co-epidemic of influenza, syncytial virus, mycoplasma infection and other respiratory infectious diseases. Everyone should do a good job in health protection and respond scientifically.

Is the flu the same as the common cold?

What are the disinfection methods for influenza virus?

Let’s take a look

Original title: "High fever to 40 C! Influenza has entered a high incidence period, how to prevent it scientifically → "

Read the original text

Experts talk about the difference between Covid-19 and SARS: it not only attacks the lungs, but also implicates the heart and kidneys.

  On the evening of February 19th, Tong Zhaohui, vice president of Beijing Chaoyang Hospital, Jiang Rongmeng, chief physician of the Second Department of Infectious Diseases of beijing ditan hospital, and Wu Anhua, director of the Department of Sensory Control of Xiangya Hospital of Central South University, and other three experts from the Central Steering Group held a press conference on the severe treatment in COVID-19, introducing the characteristics and treatment of severe and critical patients in COVID-19.

  It has been more than a month since Tong Zhaohui arrived in Wuhan on January 18th. At the press conference, he introduced that through this period of clinical observation, it was found that the age groups of severe and critically ill patients in COVID-19 were mainly over 50 years old and 60 years old, and they often had more basic diseases, such as hypertension, diabetes, coronary heart disease, and some had kidney and cerebrovascular diseases.

  What is the difference compared with SARS?

  "You may know that SARS patients in 2003 were young and middle-aged. In fact, this time they were all older and had basic diseases." Tong Zhaohui said that compared with SARS, the age and foundation of patients are different.

  Tong Zhaohui introduced that most of these patients are suffering from severe hypoxia and their condition is progressing rapidly.

  "I have also experienced SARS, which mainly involves the organs in the lungs. If we can take some measures, whether non-invasive or invasive, to reverse the lungs during SARS, the disease will basically be fine. " Tong Zhaohui said that now they found that novel coronavirus not only attacked the lungs of patients, but also the heart and kidneys.

  The expert group found that patients with severe and critical illness had higher troponin. Tong Zhaohui said that if these patients eventually develop into respiratory failure, the heart, kidneys and other organs will have problems, leading to multiple organ failure.

  Jiang Rongmeng introduced that SARS in 2003 had a characteristic, basically (patients) had a fever above 38℃. Therefore, after 2003, fever clinics were set up in China to screen out the disease, so it could be screened out at a relatively early stage.

  "But this disease (COVID-19) is different. There are still many (patients) with low fever, 37 degrees, and some without fever, so it has certain concealment." Jiang Rongmeng said.

  "After infection, the progress of this disease is relatively slow." Jiang Rongmeng said that compared with the familiar diseases, severe pneumonia can be found in three or four days after the onset of influenza or bird flu. In COVID-19, some patients are not too serious in the first five or six days, and patients may not come to see a doctor. However, patients are still contagious and will spread through family, community or friends’ dinners.

  "Another feature is that the early stage is not typical." Jiang Rongmeng said that the elderly with this disease are much more infected, and the disease is more serious. Now many patients are found to go to the general department for medical treatment because of other diseases (early). "For example, go to the respiratory department, or go to neurosurgery, or go to other departments. He may have pneumonia when he sees a doctor, but pneumonia is not serious. This disease is not the main one. He may go to see some diseases in neurosurgery. Of course, it is contagious. "

  Critical care began to get on the right track.

  Tong Zhaohui introduced that through this period of time, under the leadership of National Health Commission, the current critical care work has gradually begun to get on the right track.

  First of all, Wuhan Jinyintan Hospital, Zhongnan Hospital of Wuhan University, and Wuhan pulmonary hospital are regarded as three key hospitals that specially treat severe and critically ill patients. With the shortage of beds, it continues to expand. Wuhan union hospital West Hospital, Tongji Sino-French (tongji hospital Sino-French New Town Campus affiliated to Tongji Medical College of Huazhong University of Science and Technology) and East Hospital of Hubei Provincial People’s Hospital are also included. At present, there are six relatively large hospitals as hospitals for treating severe and critical diseases. With the arrival of medical teams from all over the country, some key and important medical teams have been placed in these six hospitals.

  Secondly, from the strategy, through the early exploration, it is concluded that we should move the threshold of rescue and treatment forward and actively treat critically ill patients. And there are national experts and provincial experts who go to various hospitals to patrol and consult and guide the work. These patients are all suffering from multiple organ failure, and there are also multidisciplinary experts for consultation. In addition, it is necessary to analyze and discuss the death cases in time and sum up some experiences.

  Third, pay close attention to and monitor the changes of patients’ condition. Some mild and ordinary patients will suddenly get worse and become severe. During this period, it is necessary for doctors to closely monitor patients’ indicators. This close observation can prevent the development of serious illness.

  Tong Zhaohui introduced that medical staff also took some intervention measures, such as trying to give patients a good environment to rest, and then antiviral treatment, as well as the treatment of combining Chinese and Western medicine, so that these light and ordinary patients can develop into severe diseases as little as possible.

  "Sometimes it is inevitable that some patients will develop into critical illness, and the transfer and referral mechanism has also been established and there are processes." Tong Zhaohui said that according to these measures, hospitals, especially several hospitals that focus on treating critically ill patients, have been running smoothly and orderly during this period. At present, some critically ill and critically ill patients are discharged from these hospitals every day.

Biden sat back in the Queen’s funeral seat, and Trump ridiculed: If I were the president, I wouldn’t be arranged to sit there.

  [Global Network Reporter Zhang Xiaoya] "US President Joe Biden and his wife Jill are obviously late. They are not allowed to ruin the elaborate funeral of the late queen." The British "Guardian" reported on the 19th that the Bidens who attended the Queen’s funeral were forced to wait for their seats after being late.

Guardian: Joe Biden was late for the Queen's funeral and was forced to wait to be seated.

Guardian: Joe Biden was late for the Queen’s funeral and was forced to wait to be seated.

  According to the report, Biden was allowed by the British side to go to Westminster Abbey, where the Queen’s funeral was held, on the 19th in the US President’s special heavy armored limousine "Beast", instead of taking a bus with other national leaders and heads of government.

  The Guardian said that when the Bidens arrived at Westminster Abbey, they were not immediately guided to their seats, but were euphemistically told that they needed to stand and wait, because in front of them, they held military medals — — The winners of the Victoria Cross and George Cross are entering the venue. The Bidens chatted awkwardly at the main entrance for a while, and finally entered the venue behind the winners of the Victoria Cross.

  According to the report, the Biden couple arrived at the funeral scene of the Queen of England at about 10: 05 am that day — — Westminster Abbey. According to the schedule announced by Buckingham Palace, invited foreign dignitaries should be seated between 9: 35 and 9: 55 am.

  "Perhaps because the Bidens did not take the bus from the assembly point of Chelsea Royal Hospital and carried other leaders, the Bidens were also arranged to sit in the 14th row behind the South Ear Hall of the church." The report also said that Biden sat behind Polish President Duda and in front of Czech Prime Minister Fiala.

Outside Westminster Abbey, Biden is sitting in a car. Figure from British media

Outside Westminster Abbey, Biden is sitting in a car. Figure from British media

  After the news that Biden was sitting in the 14th row was exposed, former US President Trump quickly posted a message on his personal website mocking Biden. "In just two years, this happened in the United States, with no respect at all." "If I were the president, they wouldn’t let me sit there."

  Earlier, according to the European version of the US "political" news network reported on the 14th, the news that Britain allowed Biden to attend the funeral of Queen Elizabeth II by car broke out, which triggered a chain reaction — — Some countries are strongly dissatisfied with this arrangement by the British side, demanding that their leaders get the same treatment as Biden and get "special permission" to go to the funeral site by car instead of by bus. Some of them think that it is "beneath dignity" for their leaders to take the bus with the leaders of "smaller countries".

21 Private Investment and Financing Weekly (September 6-September 13)

21st century business herald reporter Zhao Na intern Xiao Qian comprehensive report

Consumer service

A new generation of children’s snack brand Duomaomao completed tens of millions of A round financing.

On September 8 th, the new generation of children’s snack brand Duomaomao has completed tens of millions of A-round financing, which was jointly led by Houwei Capital (Mango Diyuan) and old shareholder Yiling Capital. This round of financing will be used for product research and development and channel laying.

Duomaomao was founded in September, 2020, and started with children’s jelly in the early days. At present, it has formed a product matrix of main and supplementary foods, snacks and condiments.

Bosie, a cutting-edge designer brand in China, completed a new round of financing of several hundred million yuan.

On September 7th, bosie, a cutting-edge designer brand, announced today that it has completed a new round of financing of several hundred million yuan. The investors are bilibili and Wuyuan Capital, and the old shareholder Jinshajiang Venture Capital is the sole financial advisor. This round of financing will be used for product development and supply chain upgrade.

Bosie is a non-sexist clothing brand, which is committed to bringing simple and generous classic items to young people who are exploring themselves and pursuing independence.

Medical health

Ruhan Gene completed tens of millions of angel rounds of financing.

On September 6th, Shenzhen Ruhan Gene Technology Co., Ltd. (hereinafter referred to as "Ruhan Gene") completed tens of millions of RMB angel round financing led by Lihe Kechuang Venture Capital, and the financing proceeds will be used for technology research and development, equipment procurement and team building.

Ruhan gene integrates the latest technologies such as bioengineering and genomics, semiconductor technology, AI big data analysis technology, micro-nano technology, etc., and develops the fourth-generation gene sequencing, nanopore virus detection and other biomacromolecule detection related equipment with independent intellectual property rights.

Zhenluo completed the B+ round financing of 100 million yuan scientifically

On September 6th, it was reported that Shenzhen Zhenluo Science Co., Ltd., the world’s leading innovative medical technology and service company in the field of central nervous system diseases, has recently completed a B+ round of financing of RMB 100 million. This round of financing was jointly led by Qiming Venture Capital and Stowe Capital, and F-Prime Capital followed suit. It is reported that the funds from this round of financing will be used for technical research, product development, international scientific research cooperation and global business development.

Zhenluo Science takes Parkinson’s disease as the market entry point of central nervous system diseases, and is committed to building a full-time diagnosis and treatment system based on advanced technology, providing innovative value for patients, clinical experts and medical equipment partners in this field.

Stance was led by CDH VGC in Series C with over $40 million.

On September 6th, Shanghai Stensai Biotechnology Co., Ltd. (hereinafter referred to as "Stensai") announced the completion of the Series C financing of over US$ 40 million. This round of financing was led by CDH VGC (CDH Innovation and Growth Fund), and many other investment institutions followed suit. This round of financing will be used for the research and development of innovative CoupleCAR platform technology, promote the development of cell therapy products for colorectal cancer and other solid tumors, and accelerate the clinical trial process in the United States and China.

Stance is a global cell therapy company, which is mainly engaged in the research and application of cutting-edge CAR-T technology and gene editing technology.

Weituo Bio, an assisted reproductive head enterprise, completed the C round of financing of 100 million yuan.

On September 7, Shenzhen Weituo Biotechnology Co., Ltd. (hereinafter referred to as Weituo Biotechnology) announced the completion of the C round of financing of 100 million yuan. It is reported that this round of financing was led by Zhongjin Qichen Fund, a subsidiary of CICC Capital, and Zhang Kehe Run and Xiang Financing followed suit. The favor of many professional investors reflects the high trust in the professional ability and strategic layout of Weituo Biological Team. This round of investment will be mainly used to strengthen product research and development, enrich product pipelines, expand professional teams and accelerate commercial landing, and further expand Weituo Bio’s leading edge in core technologies and markets.

Weituo Bio is committed to providing cutting-edge technology in the field of assisted reproduction and providing integrated solutions for assisted reproduction laboratories around the world.

RootPath completed nearly $50 million in Series B financing.

On September 7th, RootPath, a synthetic biology and gene cell therapy company, announced that it had recently completed a series B financing of nearly $50 million. This round of financing will be used for the development and commercialization of genetic synthesis products with arbitrary sequence Qualcomm quantity, long fragment and high accuracy, and for pushing its individualized TCR-T treatment project based on the technology of TCR gene synthesis and function verification with ultra-Qualcomm quantity to the clinical development stage, including the construction of GMP workshop suitable for IIT and Phase I clinical trials in China.

RootPath is a company that develops synthetic biology and cell therapy technology with the world’s leading gene synthesis platform.

"Good mood" completed the C round of 200 million yuan financing

On September 7th, "Good Mood" announced the completion of the 200-million-yuan Series C strategic financing. This round of financing was led by ByteDance, followed by Fosun Health, Decheng Capital and Xingfu Capital, and the old shareholders Tonghe Yucheng and KIP China were oversubscribed. This round of financing funds will be mainly invested in business expansion, intelligent supply chain construction, offline chain psychological clinics laying and data-based artificial intelligence product research and development, further consolidating the super-head position of mental health service industry and leading the development of the industry.

Good Mood is an Internet medical platform focusing on mental health services in CNS (Central Nervous System), which provides professional, advanced, efficient and convenient digital diagnosis and treatment services for patients with mental illness.

Mai Ruisheng completed tens of millions of yuan Series A financing.

On September 8, news, Jingmai Ruisheng Pharmaceutical Technology Co., Ltd. (hereinafter referred to as: Mai Ruisheng) announced the completion of tens of millions of A-round financing. The investor is Boqu Fund, where Fun Road Assets is the fund manager, and WinX Capital is the exclusive financial advisor. After the completion of this financing, Mindray will further build a CRO platform of "equipment+special medical food+medical beauty and health" by relying on its strong CRO capabilities.

With more than ten years’ experience in equipment CRO, Mindray Group is the largest CRO platform of "equipment+special medical food+medical beauty and health" in China, and it is also one of the equipment CRO companies with the highest net profit rate in China.

Shize Bio, an innovative cell therapy company, completed nearly 100 million yuan of Pre-A financing.

On September 8th, it was reported that Shize Biomedical Co., Ltd., a new generation of innovative stem cell therapy enterprise, recently officially announced the completion of nearly 100 million yuan Pre-A round of financing. This round of financing was jointly led by Qiming Venture Capital and Lilly Asia Ventures, followed by Daoyuan Capital and Jiacheng Capital, and all shareholders of Shize Biological Angel Wheel, Fengrui Capital, Yuansheng Venture Capital and TEDA Science Investment, followed suit. This round of financing is mainly used for the research and development of Shize Bio-core product pipeline and the construction of production workshop.

Shize Bio is committed to providing large-scale and low-cost stem cell therapy for major diseases such as Parkinson’s disease.

Several creatures completed nearly 100 million yuan in round B financing.

On September 8 th, Zhejiang Digital Biotechnology Co., Ltd. (hereinafter referred to as Digital Biotechnology) announced the completion of the B round of financing of nearly 100 million yuan. This round of financing was led by Guolian Investment, followed by Shuncheng Capital, Anyuan Fund and Chuangchuang Fund. After the completion of this round of financing, Digitalis will make great progress in the protection of external funds and the improvement of its own operational ability, which will provide sufficient guarantee for its persistent focus on tumor screening and the development, production and marketing of innovative products in the fields of maternal and child and reproductive health.

Neighbouring doctors completed tens of millions of yuan in Series A financing.

On September 9 th, neighboring medical fast medicine announced the completion of tens of millions of A round financing. This round of financing is invested by Jixianglei (Yantai) Medical Technology Co., Ltd., a wholly-owned subsidiary of Ruikang Medicine (002589.SZ) digital medical sector, and the funds will be used for market expansion, software development and upgrade, and team building.

Neighbourhood Medicine Express is a new retail empowerment solution provider of a pharmacy, which is committed to changing the traditional management mode of China pharmaceutical industry and helping it realize digital transformation with technical force.

Ruizheng Gene completed tens of millions of dollars in seed round financing.

On September 9, Ruizheng Gene (Suzhou) Co., Ltd. (abbreviated as Ruizheng Gene) announced that it has completed tens of millions of dollars in seed round financing. This round of financing was led by Junlian Capital, a well-known medical investment institution, and Cormorant followed the investment, which will be used to support the company’s R&D platform construction and the rapid advancement of pipelines.

Ruizheng Gene focuses on intracellular targets, including nuclear targets, and is committed to providing innovative drugs and treatment programs that can treat serious and even life-threatening congenital genetic diseases and acquired diseases for patients around the world.

Ge Rui surgical robot completed tens of millions of angel round financing.

On September 10th, Great Robotics, a precision imaging surgery robot, announced that it had completed tens of millions of angel round financing. This round of financing is exclusively led by Innolux Angel Fund, and the financing proceeds will be used for the core technology expansion and development of the company’s surgical robot platform, and then transformed into multiple product solutions.

Gerui Technology is an innovative medical robot company, which mainly develops a series of surgical robots according to the clinical needs and pain points based on the core technology platform of "precise image guidance" surgical robots.

Proton technology completed tens of millions of yuan series A financing.

On September 10th, Hangzhou Proton Technology Co., Ltd. completed the tens of millions of RMB Series A financing jointly led by Sigang Capital and Qirong Venture Capital, and the original shareholder Qikai Investment. This round of financing will be mainly used for product R&D investment, marketing and company operation, helping the company to continue to deepen the research and development of medical-grade vital signs monitoring technology and promote the development of artificial intelligence mobile medical industry.

Hangzhou Proton Technology Co., Ltd. is an innovative digital medical enterprise focusing on the research and development of wearable medical-grade vital signs monitoring technology. Its main business is to provide users with accurate, safe and convenient screening, diagnosis and health management services.

Biguan Bio completed tens of millions of A rounds of financing.

On September 10th, Day6 Biotech, a startup company developing a new generation of "microfluidic integrated machine" technology, announced the completion of tens of millions of RMB Series A financing, which was led by Songze Capital, followed by the old shareholders and Qingjie Capital, with Qingjie Capital as the exclusive financial advisor. The funds raised in this round will be used for clinical testing and NMPA registration of molecular POCT products with "on-demand inspection, low-cost consumables and one-step operation" developed by Biguan, and to expand the company’s R&D pipeline.

Mandi Medical, the first magnetocardiographic equipment factory in China, completed the A round financing of over 100 million yuan.

On September 10th, Mandi Medical announced the completion of the A round of financing exceeding 100 million yuan, which was jointly invested by National Science Development under the Chinese Academy of Sciences, Chinese Academy of Sciences Capital, Shanghai Microsystems Institute of Chinese Academy of Sciences, Shanghai Xinwei Group and Shanghai Guo Xin.

Mandi Medical Instrument (Shanghai) Co., Ltd. has mastered the domestic magnetocardiographic testing technology with independent intellectual property rights, and its equipment performance has reached the international level. In 2019, it became the first magnetocardiographic manufacturer in China to be approved with NMPA registration certificate.

Point technology won tens of millions of yuan in Series A financing.

On September 10th, it was reported that Diannei Technology, a medical artificial intelligence enterprise, had completed tens of millions of yuan of Series A financing, which was jointly completed by Trunk Road Fund and Empower Investment.

Founded in April 2016, Diannei Technology is one of the first enterprises to step into medical artificial intelligence image-aided diagnosis, focusing on the creation of AI lung cancer whole course solution.

LAM-Helio, a cancer early screening enterprise, completed hundreds of millions of yuan in financing.

On September 11th, LAM-Helio Group, which is committed to becoming a global leader in cancer early screening, has announced that it has completed financing of several hundred million yuan, with accumulated financing exceeding 1 billion yuan. Shareholders include Chinese Academy of Sciences Venture Capital, Chinese Academy of Sciences Parent Fund, Fulgent Genetics and other institutions and companies. The funds will be used to build the commercialization team and organization of liver cancer products, promote the Sino-US clinical approval of early screening products for intestinal cancer and lung cancer, and accelerate the optimization of early screening technologies for lung cancer and intestinal cancer with the National Cancer Center.

LAM-Helio is a life science enterprise group driven by "AI+ genomics", which focuses on early screening and early diagnosis of cancer.

smart manufacturing

Xiaomi Eco-chain Enterprise Shunzao Technology completed the $50 million Series B financing.

On September 8th, it was reported that Shunzao Technology, a technology enterprise focusing on the field of clean household appliances in Xiaomi’s ecological chain, recently completed a $50 million Series B financing. This round of investment was led by Baobi Industrial Chain Fund, followed by blue lagoon Capital, additional investment by Xiaomi Group and Shunwei Capital, and Yunmu Capital served as the exclusive financial advisor of the company. This round of financing will be mainly used for research and development of new technologies, iterative innovation of core products, global channel construction and the construction of fully automated factories for black technology.

Shunzao Technology was established in 2019. At present, it has built three categories of clean household appliances: handheld wireless vacuum cleaner, intelligent sweeping robot and intelligent washing machine.

Gartland completed hundreds of millions of RMB Series C financing.

On September 8th, it was reported that Gartland Microelectronics Technology (Shanghai) Co., Ltd. (hereinafter referred to as "Gartland"), a manufacturer of millimeter-wave radar chips with CMOS technology, had completed the C-round financing of several hundred million RMB. This round of financing was led by SDIC, with the participation of Langmafeng Venture Capital and Bank of Communications International, and the Huaxing New Economic Fund under Huaxing Capital continued to increase, with Huaxing Capital as the exclusive financial advisor.

Gartland was established in 2014, focusing on the research and development of millimeter-wave radar chips in CMOS technology, and it is the world’s leading provider of millimeter-wave radar chips.

Vibe, an intelligent hardware brand, has received a series of financing of tens of millions of dollars.

On September 7th, it was reported that Vibe (Sunlight Technology), an intelligent hardware brand, had recently completed the series A and A+ financing of tens of millions of dollars. The investors were Huachuang Capital and Sequoia China Seed Fund, and Light Source Capital served as the exclusive financial advisor for this round of financing. Previously, Vibe had received millions of dollars in financing from Challenger Capital, Xinyuan Capital and Jiuhe Venture Capital. This round of financing will be used for product research and development, supply chain integration and talent attraction.

Vibe combines the advantages of China’s supply chain with the potential enterprise market, and focuses on building a DTC(Direct To Customer) brand in the field of To B combining software and hardware.

Guona Semiconductor completed tens of millions of A+ rounds of financing.

On September 10th, it was reported that Guona Semiconductor, a developer of semiconductor components, recently announced the completion of tens of millions of A+ rounds of financing. The investors included Zhongxin Capital, Shenzhen Tianxia Future and Huada Microelectronics, the largest shareholder of Tongfu Microelectronics.

Guona Semiconductor was established in 2020, focusing on the field of integrated circuit transmission, and its main business is semiconductor transmission equipment modules and parts.

TMT

Craftsman Technology completed the B2 round of financing of nearly RMB 100 million.

On September 9th, it was reported that Craftsman Technology, a digital commercial real estate service provider, recently completed a B2 round of financing of nearly RMB 100 million. This round was led by Zhixin Capital, and Yibai Capital served as the exclusive financial advisor. The funds will be mainly used for research and development and business expansion.

Founded in 2015, Craftsman Technology has been focusing on the real estate technology track.

Youbi Technology completed tens of millions of A round financing.

On September 9, Ubisoft, a smart IOT solution provider in the energy industry, announced that it had recently completed tens of millions of RMB Series A financing, which was exclusively invested by Jingwei Venture Capital. This round of financing will be mainly used for the company’s continuous expansion of new product lines such as online monitoring of smart grid, intelligent operation and maintenance of new energy and energy storage monitoring, and continue to dig deep into domestic and foreign markets, and further improve the team structure.

Youbi Technology focuses on empowering cutting-edge technologies such as AIoT, deep learning and neural networks to industries such as power, energy and rail transit, and providing end-to-end "AI+" products, services and overall solutions to customers around the world.

Intelligent marketing platform Stepone Jizhi Technology completed 100 million yuan Series B financing.

On September 9 th, Stepone Jizhi Technology (hereinafter referred to as "Jizhi Technology"), a one-stop intelligent marketing customer acquisition platform, announced the completion of 100 million yuan Series B financing. This round of financing was led by SIG Heiner Asia Venture Capital, and Taiyue Wutong Capital, a fund of listed company Shenzhou Taiyue, followed suit. At the same time, all the old shareholders such as Guangsu China, Xinyi Capital and Xiang Hailong continued to follow suit.

Steepone Jizhi Technology is a leading intelligent customer service provider in China, providing full-process intelligent marketing services for To B enterprises based on Al big data technology.

E-PORTS was led by Jinshajiang United Capital in the B1 round of financing.

On September 6th, E-PORTS, the Internet platform of shipping industry, announced the completion of tens of millions of B1 round financing. This round of financing was led by Jinshajiang United Capital, with Index Capital as the exclusive financial advisor. The financing funds will be mainly used for system research and development, team building and market expansion.

E-PORTS takes "one-click access to world-class shipping services" as its mission, and is committed to providing online and offline world-class shipping services for global ships and port service solutions for global merchant ships.

(Author: Zhao Na Editor: Lin Kun)