Blind girls successfully registered for the national examination of teacher qualification certificate, but the written interview and physical examination are all difficult problems.

According to Red Star News, Wang Ying is a totally blind girl in Jinghai District of Tianjin. At 4: 40 pm on January 19th, only ten minutes left before the registration system was closed, she finally successfully signed up for the Tianjin Teacher Qualification Examination (written test).

She suffered from congenital glaucoma and was blind at the age of ten. Unfortunately, she was completely blind. She finished primary school and junior high school in a school for the blind, and later taught herself the knowledge of ordinary senior high school and took the adult high school entrance examination. In January 2017, she obtained an undergraduate diploma in social work from the National Open University. In addition, she took part in the self-taught examination of Chinese language and literature major in Beijing Normal University, with a total of 20 or 30 courses and five subjects to be completed.

Wang Ying’s computer and mobile phone are equipped with voice software, and every step of operation will be prompted, so that she can skillfully use electronic equipment. The pictures in this article are all Red Star News WeChat WeChat official account pictures.

She loves literature and dreams of being a Chinese teacher in high school. Her mother also wants her to have a job. The registration, Jinghai District Education Bureau, considering her eyesight, did not agree at first, and she and her mother insisted on finally signing up. But after that, there are still many unknown steps, such as applying for blind papers, interviewing, physical examination …

"If I don’t have the opportunity to participate in the process, how can I know that the result is not acceptable?" Wang Ying is the first blind candidate in Tianjin to register since the teacher qualification examination was included in the national examination. Her plan is to follow the procedure step by step.

You can’t always say that there is no precedent, you have to fight for it.. "Mom Wu Qingzhi hopes that Wang Ying can be such a" precedent ".

The teacher’s dream of blind girls

I started consulting four years ago and finally signed up this year.

From January 16th to 17: 00 on January 19th, this is the registration time of Tianjin National Primary and Secondary School Teacher Qualification Examination (written examination) in the first half of 2018, and the examination date is March 17th, 2018.

After the registration began, Wang Ying uploaded his own photos, and the audit results showed that the photos were unqualified.

Wang Ying’s registration failed many times, and the audit opinion showed that "the photo was unqualified". Finally, ten minutes before the registration deadline, he finally passed the audit and registered successfully.

On January 17th, Wang Ying and her mother went to the Education Bureau of Jinghai District for consultation. The staff of the Admissions Office said that because she was totally blind, she couldn’t register because she didn’t pass the physical examination. In fact, since 2014, their mother and daughter have been to the Education Bureau for consultation, and they will get such an answer every time.

She wants to apply for a high school Chinese teacher, which requires an undergraduate diploma to qualify. Before she finished her studies in the first few years, she just asked briefly, but now that she has an undergraduate diploma, she thinks she must sign up.

Wang Ying didn’t want to give up. She called Tianjin Education Admissions Examination Institute for consultation.

"It’s not that we restrict you. Even if you pass the written interview, you can’t get the teacher’s qualification certificate if you fail the physical examination. The final result is still the same." The staff of the examination institute answered her.

"This is different. Now it is a process. If I don’t have the opportunity to participate in the process, how can I know that the result is not possible?" Wang Ying said.

The staff of the examination institute consulted and still replied that she couldn’t: "First, we don’t have blind papers, and second, teachers don’t recruit blind people." And once again, I stressed that I can’t pass the physical examination and I can’t get the teacher qualification certificate.

The reporter obtained a schematic diagram of the work flow of Tianjin teacher qualification certification in 2017. According to this process, Wang Ying will face many tests next.

Wang Ying went on to reply that the examination papers or physical examinations for the blind are all things in the future and can’t be stuck in advance. "I just signed up and talked about it later."

"If you can’t take the test then, why do you sign up?" The staff asked.

"That’s the next step. Even if I can’t take the test then, it’s my personal reason." Wang Ying replied.

At 2 o’clock in the afternoon on the 19th, Wang Ying and her mother came to the Education Bureau of Jinghai District again and continued to strive for registration. At 4: 40, there were only ten minutes left before the registration system was closed. After reporting to the superior, the relevant staff of Jinghai District Education Bureau finally signed up Wang Ying.

"I have been grinding there and fighting for opportunities." Mother Wu Qingzhi recalled the situation at that time and breathed a sigh of relief.

There is no restriction on blind people in the application conditions.

The application materials for Braille papers or electronic papers have been mailed out.

Is Wang Ying qualified to register for the teacher qualification examination?

On the China Education Examination website, the reporter found the Announcement of Tianjin National Primary and Secondary School Teachers’ Qualification Examination (Written Examination) in the First Half of 2018, in which nine items were listed in the "Entry Conditions", which stipulated the qualifications, domicile, personnel relationship and other conditions, but did not put forward any related requirements such as prohibiting blind people from entering the examination.

Rui Huang, a lawyer of Henan Zhanzhan Law Firm, told Red Star News that Article 4 of the Regulations on Employment of Disabled Persons stipulates that the state encourages social organizations and individuals to help and support the employment of disabled persons through various channels and forms, and encourages disabled persons to obtain employment through various forms such as job application. Discrimination against disabled people in employment is prohibited, and disabled people should improve their own quality and enhance their employability.

"The regulations prohibit discrimination against disabled people in employment. If blind people are excluded from taking the teacher qualification examination without legal reasons, it is naked discrimination." Rui Huang said.

Successful registration is the first breakthrough, and then Wang Ying will start to plan the examination paper.

The examination time is March 17th, which is less than two months, and there is a Spring Festival holiday in the middle. After consulting lawyer Rui Huang, Wang Ying began to prepare materials quickly and wrote two applications, "one is to apply for an electronic test paper, and the other is to apply for special convenience." She told Red Star News that the application would be printed out after it was written and sent to the examination center of the Ministry of Education.

Wang Ying wrote the application.

It is understood that there are several ways for blind people to take exams: Braille papers, electronic papers or manual reading. On the afternoon of January 24th, Wang Ying and her mother printed the Application Form for Government Information Disclosure and other materials, and mailed them to the Ministry of Education, the Examination Center of the Ministry of Education, the Tianjin Municipal Education Commission and other departments at the post office to apply for Braille papers or electronic papers.

For the next steps, Wang Ying can’t think so far now. What she cares about now is the examination paper. Lawyer Rui Huang introduced that Article 54 of the Law of the People’s Republic of China on the Protection of Disabled Persons stipulates that all kinds of entrance examinations, vocational qualification examinations and post-holding examinations held by the state, in which blind people take part, should provide blind people with braille papers and electronic papers or be assisted by specialized staff.

Director of admissions

It is necessary to build a "blind road" and introduce special policies for special groups.

A staff member of Tianjin Education Admissions Examination Institute told Red Star News that in the second half of 2016, the teacher qualification examination was changed from the provincial examination to the national examination. After the national examination, the examination institute began to undertake related work, and Wang Ying was the first blind person to register.

"There should be more appeals and special measures should be taken for this special group." A director of the Admissions Office of the Education Bureau of Jinghai District, surnamed Liu, told Red Star News that at first, they thought that Wang Ying’s physical examination would definitely be a hard time, so they didn’t let her apply. Later, they saw that she really insisted. After asking the Tianjin Education Admissions Examination Institute, they agreed, and then they only said it step by step.

Director Liu introduced that there were also blind candidates who wanted to sign up for the teacher qualification examination before, but they were all discouraged because there were still vacancies in this area. "Just like blind people walking, let them go blind, but only if there is a blind road. If you let them walk on the normal road, they will definitely bump into each other and often violate traffic rules. "

Director Liu believes that this is not only a problem in Jinghai District or Tianjin. It is necessary to appeal to relevant departments to introduce special policies for special groups, because there are a series of procedures such as interview, physical examination and qualification recognition after the written test. "It is like building a blind road for them, and it will be unimpeded. If they are allowed to squeeze in ordinary people, they will be hit harder in the future."

Wang Ying reads books in Braille.

Executive Vice Chairman of China Blind Association

Disabled people are eligible to take the national examination, but there are many difficulties in practice.

Li Qingzhong, executive vice chairman of the China Association for the Blind, told Red Star News that there have been many successful cases of blind or visually impaired people becoming teachers at home and abroad, and they also have unique value. "For example, if a blind child is disobedient, an ordinary teacher will criticize it. It may make him rebellious, and blind teachers are more able to confide."

According to Li Qingzhong, according to relevant laws and regulations, disabled people are eligible to take national examinations, including college entrance examination, judicial examination, civil service examination, teacher qualification examination, etc. However, there are many difficulties in actual operation in various places, and even if they pass the examination, the physical examination standard is a great obstacle for them.

In the Education Bureau of Jinghai District, the reporter saw a printed "Tianjin Teacher Qualification Examination Standard", which showed:

Apply for the qualification of kindergarten and primary school teachers, with reference to the relevant provisions of the "secondary normal school enrollment physical examination standards"; Apply for the qualification of junior middle school teachers and above, with reference to the relevant provisions of the "higher normal school enrollment physical examination standards". The former stipulates that the sum of corrected visual acuity of both eyes is less than 5.0, and the latter is that the corrected visual acuity of both eyes is less than 5.0.

According to this standard, those whose corrected visual acuity is less than 5.0 in both eyes cannot be admitted.

Present situation of blind teachers

Both schools for the blind and ordinary schools have blind teachers.

Li Qingzhong told Red Star News that there are blind teachers in ordinary schools and schools for the blind, mostly in schools for the blind. There is no official statistics on the number of these blind teachers. However, there are nearly 100 blind teachers in a "group of blind teachers in national schools for the blind" he added. "There may be some others that we don’t know." According to Li Qingzhong, there are about 30 specialized schools for the blind in China.

Li Qingzhong introduced that most of the blind teachers in ordinary schools are blind halfway, such as Yang Jia, a professor at the Graduate School of China Academy of Sciences, and Fu Minghui, a professor at Sun Yat-sen University. "They were blind when they were very young, and then they made great contributions and proved to be competent for that job."

The blind teachers in blind schools, in addition to being blind halfway through the teacher qualification, were also blind before teaching, but they went to work in advance and obtained the teacher qualification after they were sure to be competent.

Wang Ying’s reading machine, if she wants to read ordinary books, she needs to scan pages into an electronic version, then use software to identify the words on the electronic version of the picture, convert them into documents, copy the documents into the reading machine, and read them out by voice.

Lv Min is a blind teacher in Anqing Special Education School. He was completely blind at the age of 12 due to traumatic retinal detachment, and then he was selected to enter the school. "We didn’t implement the teacher qualification certificate until many years after we joined the work, so we are a natural transition."

Lv Min told Red Star News that two young blind teachers who entered the school more than ten years ago passed the examination and obtained the teacher qualification, but at that time, the school came forward to communicate and got the certificate according to special circumstances. "It is difficult to coordinate the implementation of the national unified examination now, which is not something that schools can do."

A teacher from Tianjin School for the Visually Impaired told Red Star News that there are more than 50 teachers in the school, most of whom have normal vision or slightly low vision. There is only one teacher who is totally blind, which came more than 20 years ago. "Maybe it was not so strict at that time." Now, basically only normal vision can come in.

Beijing school for the blind is also in a similar situation. A teacher of the school told Red Star News that there are no completely blind teachers in the school, and a few of them have low vision. "They are all of a certain age, and they also met the relevant conditions at that time. It is not clear how they obtained the teacher qualification certificate before." The teacher introduced that if you want to enter the school as a teacher through public recruitment, including entering the Beijing School for the Blind, you must have a teacher qualification certificate, otherwise you will not be able to work.

"Recently, our China Blind Association also communicated with the Ministry of Education through the China Disabled Persons’ Federation and other departments, and put forward several requirements in writing, such as providing blind papers in some exams." Li Qingzhong said, firstly, we should strive to promote the admission of blind people into the teaching staff, and secondly, we should promote the amendment of laws and regulations. If a series of standards are not changed, it will be difficult for blind people to become teachers now.

"Dreamcatcher" in the dark

Take down the pages of the textbook, scan it and convert it into "lectures"

Wang Ying’s online name is "Dream Chaser". For more than twenty years, she has been doggedly following her dreams.

After finishing junior high school, because there were no ordinary high school courses in blind schools, Wang Ying had to study acupuncture, massage and other majors again. She didn’t like it, so she chose to drop out of school, teach herself ordinary high school courses and read a lot of books on literature, history and philosophy.

Besides Braille books, she needs to read many ordinary textbooks or books, and this process is tedious.

Wang Ying reviewed the textbooks for the teacher qualification examination. The textbooks were dismantled and every page could be taken down.

She needs to tear down the pages of ordinary textbooks, scan them into picture format with a scanner, then identify the words on the pictures with software and convert them into documents, and then copy the documents into a reading machine and read them out by voice. Recently, her reading machine broke down and she listened to it on the computer. "Some words can’t be recognized, and you have to type them by hand. It’s hard." Mom Wu Qingzhi said.

Wang Ying studies at home every day. Her computer and mobile phone are equipped with voice software, and there will be voice prompts at every operation step. With such assistance, she can skillfully operate electronic equipment. She writes articles, sends photos in qq space, and sends friends with WeChat. She added some friends to WeChat and qq, entered some groups, and the text and expression voice software sent by the other party would be read.

"If you send a picture, you will be prompted to have a picture, but I don’t know what the picture is." Wang Ying said.

There is a thick stack of award certificates, and I like to develop the photos of my visit into a book.

Wang Ying has a thick stack of award certificates. She has a wide range of interests. When she was a child, she liked to participate in various competitions such as recitation, speech, hosting and cross talk. Later, she mainly focused on literature and published her works in newspapers and magazines.

Wang Ying and her honorary certificate.

In 2006, she won the silver medal in recitation in the fourth national children’s artistic style exhibition competition; In 2007, after domestic selection, she went to Russia with more than a dozen other youth representatives to participate in the performance of the Sino-Russian Cultural Exchange Year and won the title of "Art Angel of Sino-Russian Friendly Exchange"; In 2015, she won the first prize of the first National Prose Competition for the Blind, and participated in TV programs such as Good Chinese Poetry and Tang Poetry.

She likes to travel, sometimes accompanied by her mother and sometimes attending summer camps. She developed many photos of her visit and made them into photo albums.

Wang Ying’s visual memory of the world is very vague, and she only has a little impression of the moon. She also has no visual concept of various colors, but she can describe them by imagination.

"For example, pink is a dreamy and romantic feeling." Wang Ying said. 

Original title: The blind girl successfully registered for the national examination of teacher qualification certificate, but the written test, interview and physical examination are all difficult problems.

[Disclaimer] The texts, pictures, audio and video that are not marked with "Source: Upstream News-chongqing morning post" or "Upstream News LOGO" on the upstream news client are all reposted. If the reposted manuscript involves copyright issues, please contact the upstream news.

The Central Meteorological Observatory continued to issue a yellow rainstorm warning at 06: 00 on September 6.

CCTV News:According to the website of the Central Meteorological Observatory, the Central Meteorological Observatory continued to issue a yellow rainstorm warning at 06: 00 on September 6:

It is estimated that there will be heavy rains in parts of eastern and southern Fujian, central and eastern Guangdong, southwestern Jiangxi, southeastern Hunan, central Hainan Island and western Taiwan Province Island from 08: 00 to 08: 00 on September 6, among which there will be heavy rains (100-180 mm) in parts of southeastern Fujian, northeastern and southeastern Guangdong, and southwestern Jiangxi. Some of the above areas are accompanied by short-term heavy rainfall (the maximum hourly rainfall is 20 ~ 50 mm, and the local area can exceed 60 mm), and there are strong convective weather such as thunderstorms and strong winds.

Defense guide:

1, the government and relevant departments in accordance with their duties to do a good job of rainstorm prevention;

2. The traffic management department shall take traffic control measures in heavy rainfall sections according to the road conditions, and implement traffic guidance in waterlogged sections;

3, cut off the dangerous outdoor power supply in low-lying areas, suspend outdoor work in open places, and transfer people in dangerous areas and residents of dangerous houses to safe places to shelter from the rain;

4, check the city, farmland, fish pond drainage system, take the necessary drainage measures.

The 917 Highland Lion of Shanghai Dongfeng Warrior was listed at a price of 699,000 yuan.

At the #2024 Guangzhou Auto Show #, the Dongfeng Highland Lion was listed at a price of 699,000 yuan. The appearance of the new car is added with brand-new metal side bars, front and rear metal protective bars, roof expansion platform, rear spare tire bracket, etc., armored magnesium-aluminum alloy front and rear bumpers, with a thickness of 5mm and a chassis guard plate thickness of 8 mm. In the fully equipped state, the length, width and height are 5143 mm and 2080 mm and 2086 mm. The minimum ground clearance of the whole car is 268mm, the approach angle is 33, the departure angle is 34, the passing angle is 23, and the maximum climbing degree is 100. Multi-gear adjustable nitrogen shock absorber, the power is still extended range system, 1.5T engine is used as the range extender, the maximum power of three motors is 816 horsepower, the peak torque is 1050N·m, and it is also equipped with front and rear differential lock+mortise and tenon middle lock and rear wheel steering. # Guangzhou Auto Show Tide Here Look #

Technical blockade! Automatic gearbox inventory of dozens of autonomous vehicles

    [XCAR Information Original] 

    As we all know, engine, gearbox and chassis are the three key components of an automobile, and they are also the core technologies that a vehicle manufacturer must master. In the last article, we talked about the achievements of independent brands in engine research and development. In the early stage, independent manufacturers mostly used imitation and purchase to obtain engine technology. Compared with engines, the lack of self-owned brands in automatic gearbox technology is more obvious. The research and development of automatic gearbox is difficult, with high technical content, and it is difficult to imitate in a short period of time, which makes it impossible for self-owned brands to develop automatic gearboxes that can be applied on a large scale at present.

gearbox
Technical blockade! Automatic gearbox inventory of dozens of autonomous vehicles

    There is a great demand for automatic gearbox in the market, and the demand is still growing, which makes independent brands can only obtain automatic gearbox by purchasing. However, the lack of their own technology and the restrictions of foreign gearbox manufacturers also lead to the limited choice of automatic gearbox for independent brands, and most of the products they carry do not have much technical advantage. Today, what we are going to introduce to you are several automatic gearboxes that are common in our own brand models.

   ● AT gearbox

    Manual gearbox is mainly composed of gears and shafts, which produce variable speed and torque through different gear combinations; The automatic gearbox AT is composed of hydraulic torque converter, planetary gear and hydraulic control system, which realizes variable speed and torque by means of hydraulic transmission and gear combination.

    Hydraulic torque converter is the most characteristic component of AT gearbox, which is composed of pump wheel, turbine and guide wheel, and directly inputs engine power to transmit torque and clutch action. Pump wheel and turbine are a pair of working combinations, which are like two fans placed opposite each other. The wind from one active fan will drive the blades of the other passive fan to rotate, and the flowing air — — Wind becomes the medium of kinetic energy transfer.

AMT gearbox 
Hydraulic torque converter of conventional automatic gearbox

    If air is replaced by liquid as the medium to transfer kinetic energy, the pump wheel will drive the turbine to rotate through the liquid, and then a guide wheel is added between the pump wheel and the turbine to improve the transfer efficiency of the liquid. Because the range of automatic speed change and torque change of hydraulic torque converter is not large enough and the efficiency is low, several rows of planetary gears are connected in series behind the turbine to improve the efficiency, and the hydraulic control system will automatically control the planetary gears with the change of engine work, thus realizing automatic gear shift.

    Self-owned brand AT gearbox provider 1: Aisin Seiki

    Manufacturer profile:Japan Aisin Seiki Co., Ltd. is one of the world’s top 500 enterprises and the ninth largest auto parts manufacturer in the world. Founded in 1949, the company is the main supplier of Toyota auto parts, and its auto parts manufacturing technology is world-famous.

 gearbox
Aisin Seiki provides AT gearboxes for most domestic independent manufacturers.

    Aisin Japan Co., Ltd. is an import and export trading company specializing in auto parts, auto warranty equipment, hardware, mechanical equipment, power tools and other products. About 95% of the company’s sales come from auto parts, but the company also manufactures refrigeration equipment and cutting machines, as well as consumer products such as beds and sewing machines. Aisin Seiki has subsidiaries in the United States, Europe, Asia and Australia.

    Roewe 750

    Aisin Triple-Mode five-speed automatic manual transmission

    Named KV6, the 2.5 V6 engine is mounted on the Roewe 750, SAIC’s first self-owned brand model. It is said that it is of the same ancestry as the Land Rover Freelander in the UK, and it is also made of aviation-grade all-aluminum material in terms of materials, which not only reduces the weight by 40%, but also improves the efficiency by 20%, and can explode 135KW at 6500 rpm. With EVIC-III intelligent dual-valve variable air intake control technology, the maximum power is 135KW/6500rpm and the maximum torque is 240Nm/4000rpm.

Autonomous engine 
SAIC Roewe 750

Autonomous engine
Roewe 750 gearbox comes from Aisin.

    Matching this V6 engine is a five-speed Triple-Mode intelligent adaptive automatic gearbox from Aisin-Warner, Japan. There are three modes: normal mode, sports mode and snow mode. In sports mode, you can obviously feel the rise of power level.

    Roewe 550/MG6

    Aisin 5-speed Tiptronic gearbox

    Roewe 550 is equipped with a 1.8L ordinary aspirated engine and a 1.8T turbocharged engine respectively. The 1.8T all-aluminum engine can output the maximum power of 118kw horsepower at 5500 rpm and the maximum torque of 215Nm at 2500-4500 rpm. Numerically, the Roewe 550 lags behind the Volkswagen engine with the same 1.8T engine in terms of torque output.

SAIC Roewe 10 Roewe 550
Roewe 550 is equipped with Tiptronic five-speed automatic manual transmission provided by Aisin.

    Roewe 550 automatic transmission adopts 5-speed Tiptronic automatic manual transmission made by Aisin, which has excellent performance, both the advantages of simple operation of automatic transmission and the advantages of arbitrary manual transmission. However, in actual driving, Roewe 550 is more comfortable, and the power and gearbox are relatively mild, without too intense control.

    In addition, MG6, which is on the same platform as Roewe 550, is also equipped with Japanese Aisin Tiptronic five-speed automatic manual transmission. After the driver hangs in manual mode, he can also manually shift gears through the shift paddles behind the steering wheel to improve driving pleasure.

    Roewe 350

    Aisin 4-speed Multi-Mode automatic gearbox

    The 1.5L naturally aspirated engine equipped on the Roewe 350 uses a silent timing chain and a VTi multi-angle continuous variable timing system (variable timing of intake and exhaust), with a maximum power of 80kw/6000rpm and a maximum torque of 135Nm/4500rpm. With 5-speed manual transmission and 4-speed automatic transmission.

Roewe 350
Roewe 350

Roewe 350
Roewe 350 gearbox is equipped with a four-speed gearbox provided by Aisin.

    Roewe 350 is equipped with the 4-speed Multi-Mode automatic gearbox of Aisin Japan, which can be adjusted and corrected according to the driver’s driving habits and road conditions to ensure the smoothness when shifting gears.


Aisin is the main supplier of AT gearbox with its own brand.


    Pentium B50

    Aixin AQ250 series six-speed automatic manual transmission

    Pentium B50 is equipped with Volkswagen’s 4-cylinder 8-valve single overhead camshaft engine, and its technology is old. The maximum power of 74kW/6000rpm and the maximum torque of 145Nm/3800rpm are a little behind in the same displacement. However, this Volkswagen engine, which is also equipped on Jetta and Sagitar, has more than 2.3 million units in China, which means that the maintenance and repair of this engine is more convenient and economical.

2011 Pentium B50
Pentium B50 is equipped with 6-speed automatic manual transmission provided by Aisin.

    Matching this engine is an Aisin AQ250 series six-speed automatic manual transmission, which is easy to be mistaken for the same one used by sagitar and Bora. Although both are six-speed automatic manual transmission, the Pentium B50 is not Tiptronic six-speed automatic manual transmission, but Aisin’s six-speed automatic manual transmission. This gearbox matches Volkswagen’s 1.6L engine very well.

    Pentium B70

    Aisin 5-speed automatic manual transmission

    Pentium B70 and mazda 6 belong to the same platform model, with 2.3L and 2.0L powertrains. The 2.0L engine is the main engine, equipped with the same 2.0L engine as mazda 6, with the maximum power of 146 HP /6500rpm and the maximum torque of 183Nm/4000rpm, and with S-VT variable valve timing and VIS variable intake manifold technology.

2.0L automatic deluxe edition
B70 is equipped with a 5-speed automatic manual transmission provided by Aisin.

    Like mazda 6, the Pentium B70 is equipped with a 6-speed manual transmission or a 5-speed automatic manual transmission, which is provided by Aisin Seiki.

    Guangzhou automobile chuanqi

    Aisin 5-speed automatic manual transmission

    GAC Chuanqi officially rolled off the assembly line on September 3rd. The first batch of GAC Chuanqi off the assembly line was equipped with a 2.0L engine. This engine did not adopt the direct injection technology previously speculated by the media, but was an ordinary naturally aspirated model with a maximum power of 110kw/6300rpm. Then GAC will launch Chuanqi’s 1.8L model.

Guangzhou automobile chuanqi
Chuanqi will carry a variety of models from 1.8 to 2.4L.

Guangzhou automobile chuanqi
5-speed automatic manual transmission provided by Aisin.

    Chuanqi will match the 5-speed manual or 5-speed automatic manual transmission, instead of the AMT gearbox previously speculated by the media. The 5-speed manual transmission is also from Fiat, which is the original manual transmission of Alfa Romeo 166, while the 5-speed automatic manual transmission is from Aisin Seiki, Japan, which is also a very mature and reliable product.

    Dongfeng fengshen S30

    Aisin Step-gate four-speed intelligent automatic transmission

    Fengshen S30’s 1.6L engine equipped with PSA, a partner, has stable and reliable quality. The maximum power reaches 78KW, and the torque output reaches 85% of the maximum at 1,500 rpm, 90% at 2,000 rpm, and reaches the maximum torque of 142Nm at 4,000 rpm.


Dongfeng fengshen S30


Dongfeng fengshen S30 gearbox comes from Aisin.

    Fengshen S30 automatic gearbox is equipped with Japanese Aisin Step-gate four-speed intelligent automatic transmission, which is calibrated by German GIF company. The automatic gearbox has mature technology, can automatically learn and remember the driver’s driving habits, and can provide the desired shift mode at any time.

    Chang ‘an Yuexiang

    Aisin DSS 4-speed automatic transmission

    Changan Yuexiang is equipped with a 1.5L displacement engine, with a maximum power of 72kw and a maximum torque of 137Nm, and its maximum torque can be output at 3500 rpm.

Chang 'an Automobile Yuexiang
Yuexiang is equipped with Aisin DSS 4-speed automatic transmission

    Yuexiang’s automatic transmission model matches the original Aisin DSS 4-speed automatic transmission imported from Japan. The biggest feature of this gearbox is that the electronic control replaces the traditional hydraulic control, which realizes life-long maintenance-free and no need to change lubricating oil, and has longer service life, stronger reliability, better ride comfort and economy.

    Brilliance Junjie cross

    Aixin 4-speed automatic gearbox

    Junjie Cross1.5L and 1.6L engines are available. 1.5L engine is 4a151.5l in-line 4-cylinder dual overhead camshaft VVT-i variable valve technology engine independently developed by Brilliance Auto. The rated power of this engine is 75kw/5500-6000rpm, and the maximum torque can reach 135Nm/4500rpm. The 1.6L engine is a Mitsubishi 4G18 1.6L engine from dongan power, with a power of 74kw/6000rpm and a maximum torque of 138Nm/4500rpm.


Junjie cross is equipped with Aisin 4-speed automatic transmission.

    Junjie Cross is equipped with Aisin 4-speed automatic transmission, with automatic manual function. Compared with the four-speed automatic gearbox used in the self-owned brand models below 100,000 yuan, its shift smoothness is at the leading level.

 


Self-owned brand model equipped with Aisin AT gearbox


 

    Independent brand AT gearbox supplier II: Mitsubishi Corporation

    On February 1st, 2010, the first auto automatic transmission imported from Japan’s Mitsubishi technology was officially rolled off the assembly line in Dongan Mitsubishi. At this point, Dongan Mitsubishi will be able to provide automobile engines, manual gearboxes and automatic gearboxes.


Mitsubishi engines are widely used in self-owned brands.

    The first phase of the automatic gearbox project of Dong ‘an Mitsubishi has been completed, which can produce 4AT and 5AT gearboxes, and has the technical space to upgrade to 6AT, with an annual production capacity of 150,000 units, meeting the power transmission demand of engines with displacement of 1.3L-2.4L.

    Brilliance Junjie FRV

    Mitsubishi 4-speed automatic manual transmission

    Junjie FRV adopts Mitsubishi 4G18S and 4G13S power engines in the whole car series, of which the maximum power of 4G13S engine is 62.5KW/6000rpm. The maximum torque output is 108/4500 Nm/rpm. It will be equipped with a 5-speed manual transmission and a 4-speed automatic manual transmission from Mitsubishi.

Brilliance China Junjie FRV
Brilliance Junjie FRV

Brilliance China Junjie FRV
Mitsubishi’s 4-speed automatic gearbox

    Self-owned brand AT gearbox supplier 3: Japan JATCO Company

    JATCO is the third largest manufacturer of automatic gearbox design in the world. Founded in 1943, JATCO is one of the three largest suppliers of automatic gearbox in the world.

    Its business covers Europe, Asia and America, and mainly provides automatic gearboxes for most mainstream vehicle manufacturers such as Nissan, Mitsubishi, Mazda, BMW, Volkswagen, Land Rover, Jaguar, Kia, Hyundai, Daewoo, Changan Ford and Brilliance, with an annual supply of more than 4 million units. Jeep Guide, Dongfeng Nissan Sylphy and Ford Mondeo are all equipped with gearboxes produced by JATCO.

    Byd F3

    JATCO four-speed automatic gearbox

    BYD F3 is equipped with 1.6L and 1.5L power, and the platinum version is equipped with Mitsubishi 4G15S inline four-cylinder /16-valve, using Mitsubishi MVV vertical vortex lean combustion technology. The maximum power can reach 78 kW at 6000 rpm and the peak torque of 134Nm at 4500 rpm. Match 5-speed manual or 4-speed automatic gearbox.


Byd F3

one
A 4-speed automatic gearbox produced by JATCO.

    BYD F3 automatic transmission uses the original imported 4-speed automatic gearbox produced by Japanese manufacturer JATCO. The four-speed gearbox produced by JATCO company has mature and reliable technology, and its matching with Mitsubishi engine is excellent. Mitsubishi Corporation has completed all the vehicle calibration work for the powertrain, and its power performance, fuel economy and maneuverability have reached a high level.

    Independent brand AT gearbox supplier 3: Hyundai Motor

    In 1967, Zheng Zhouyong founded Hyundai Motor Company. After more than 40 years of development, it has become the largest automobile manufacturer in South Korea and entered the ranks of world-famous automobile companies.

    Chery Ruiqi G5

    Hyundai 5f25at gearbox

    The Ruiqi G5 automatic transmission model will also use the 2.0TCI engine independently developed by Chery, with a maximum power of 116Kw/5000rpm and a peak torque of 250Nm. The 2.0TGDI turbocharged direct injection engine has a maximum power of 144kw/5500rpm and a maximum torque of 290Nm/1800rpm. Due to the large output torque, only the 6-speed manual gearbox is matched.

Ruiqi G5

Ruiqi G5  Ruiqi G5
Ruiqi G5 is equipped with a 5-speed automatic transmission provided by Hyundai.

    The 2.0TCI engine of Ruiqi G5 matches the 5AT gearbox provided by Hyundai. This automatic gearbox is 5F25, with five forward gears and the maximum transmission torque of 250Nm.

   Independent brand AT gearbox supplier 4: Geely (independent research and development)

    Geely panda

   Geely JL-ZA 142 fully automatic 4-speed gearbox

    Panda uses 1.0L and 1.3L displacement engines. The 1.0L engine has a maximum output power of 50KW, a peak torque of 88Nm when the speed reaches 3600 rpm, and a lifting power of 52kw. CVVT technology is adopted. The other 1.3L engine, code-named MR479Q, has a maximum power of 63kW and a maximum torque of 110N·m, which is basically equivalent to the same displacement engine on the market.

 

panda
Geely panda

gearbox
A 4-speed automatic gearbox independently developed by Geely.

    The automatic version of Panda is equipped with JL-ZA142 fully-automatic 4-speed gearbox independently developed by Geely. It was successfully developed by Geely after three years of huge investment. It not only won the first prize of scientific and technological progress in China automobile industry, but also won the evaluation of "advanced level of international similar products". This is also the only automatic gearbox with independent intellectual property rights in China. Independent research and development makes panda automatic transmission models have great advantages in price.

 


Other AT gearbox suppliers


 

   ● continuously variable transmission

    CVT has no specific gear, and its operation is similar to that of automatic gearbox, but the change of speed ratio is different from the trip stop process of automatic gearbox, but continuous, so the power transmission is continuous and smooth.

    The advantages of CVT are as follows: First, the power output of CVT gearbox is linear, and the shifting frustration caused by it also disappears, which is very smooth in actual driving. Secondly, the transmission system of CVT can have infinitely many gears in theory, and the gear ratio, speed ratio and the balance of performance, fuel consumption and exhaust emission in the traditional transmission system are easier to achieve. Finally, the mechanical efficiency and fuel economy of CVT transmission are much better than ordinary automatic transmission, second only to manual transmission, and the fuel economy is much better.

gearbox
continuously variable transmission

    So CVT has no shortcomings? The answer is no, first of all, when starting or accelerating, CVT steel belt or belt is prone to slip, which will affect the power transmission, thus affecting the acceleration feeling. Secondly, CVT steel belt or belt material requirements are relatively high. Although CVT has a simple structure, if it fails, it is generally not a minor problem. This will affect the use of car owners and increase maintenance costs.

gearbox
continuously variable transmission

    One supplier of CVT gearbox: Punch Company of Belgium

    Belgian Punch (Bang Qi) Company is a German ZF company specializing in the production of transmissions (including CVT).

    Under the premise that international automobile manufacturers have blocked the key technologies in China, Bang Qi is also the only overseas manufacturer that provides CVT gearboxes for domestic independent brands, and the gearboxes provided are not the most advanced products at present, and the actual performance is average.

    Southeast V3 Lingyue

    Punch VT2 transmission

    V3 Lingyue is equipped with 4A91 engine produced by Shenyang Aerospace Mitsubishi, and uses the latest MIVEC variable valve timing system of Mitsubishi Motors, which truly reaches the international advanced level of natural inhalation, with a maximum power of 120 HP and a maximum torque of 143Nm/4000rpm.

undefined
V3 Lingyue CVT version adopts intelligent CVT continuously variable gearbox with 6-speed manual gear.

    The V3 Lingyue automatic transmission is equipped with a new generation VT2 CVT CVT produced by Punch, a famous transmission company. The transmission adopts the technology, technology and production line of Punch company completely, with 6-speed automatic manual transmission and various intelligent modes such as snow and sports, so that drivers can choose the most suitable driving mode according to their own driving habits and climatic factors.

    Great Wall Tengyi C30/ Xuanli/Lingao

    Punch VT2 transmission

    Great Wall Tengyi C30, Xuanli and Lingao are all equipped with GW4G15 engine. GW4G15 engine is an all-aluminum gasoline engine developed by Great Wall Motor, which adopts double overhead camshaft, 4 cylinders and 16 valves, plastic intake manifold and VVT technology. With a maximum power of 77kW and a maximum torque of 138Nm, this engine can easily achieve Euro IV emission.

Tengyi C30
Tengyi C30

Tengyi C30
Tengyi C30 is equipped with CVT gearbox provided by Bang Qi.

    Tengyi C30 and CVT continuously variable transmission carried by Xuanli and Lingao are internationally renowned original imported products from PUNCH, Belgium. It is worth mentioning that this type of CVT has also been applied to the old Mini Cooper, and its value has increased by 27.80% compared with that of 4AT transmission at 0-100km/h, 19.30% at 80-120km/h and 18% at 100-140 km/h.

    Emgrand EC7

    Punch VT2 transmission

    Emgrand EC718 is powered by Geely’s JL-4G18 CVVT engine with a displacement of 1.8L The maximum power is 102kW (139HP) /6200rpm and the maximum torque is 172Nm/4200rpm.


Geely emgrand EC718

    The CVT gearbox matched with Emgrand EC7 1.8L engine is a VT2 CVT continuously variable transmission from Belgian Punch (Bang Qi) company, which has three modes: manual (6-speed), sports and economy (normal).

    BYD G3

    Punch VT2 transmission

    BYD G3 has four models with 1.5L and 1.8L displacement. The 1.5L model adopts BYD473QB and Mitsubishi 4G15S champion engines independently developed by BYD, the 1.8L model adopts BYD483QA engine independently developed, and the 1.8L automatic transmission model adopts the newly developed CVT continuously variable gearbox, with the maximum output power of 90kw at 6000 rpm and the maximum torque of 160Nm at around 3700 rpm.

Aika car network pictures
BYD G3 is equipped with CVT gearbox provided by Bang Qi.

    BYD G3 uses a CVT transmission of VT2 type in Bang Qi. Its technical feature is that it can simulate a 6-speed manual transmission and also has a sport mode.

    CVT gearbox supplier II:Jiang Lu Rong da

    Hunan Jianglu Rongda Vehicle Transmission Co., Ltd. was established in November 2003. It was established by Hunan Jianglu Machinery Group, Hunan Xicheng Industrial Group and Northern Transmission Company on the basis of the original Hunan Rongda Automobile Electronic Technology Co., Ltd., with a registered capital of 88 million yuan. It is a high-tech company specializing in the development, production and technical services of continuously variable transmission (CVT) of cars in China.

    Lifan 620

    Lifan 620 CVT still uses the lf479q2 1.5L engine produced by Lifan, with a maximum power of 69kW and a maximum torque of 128Nm at 3500 rpm.

Aika test drive lifan 620 CVT
Lifan 620

Aika test drive lifan 620 CVT
Lifan 620 gearbox is provided by Jianglu Rongda.

    The steel belt, the core technology of CVT gearbox in lifan 620, comes from Bosch. Compared with the ordinary version of AT gearbox, equipped with CVT technology, it can improve power by 10% and save fuel consumption by 10%-15%, with a fuel consumption of 7.5L per 100 kilometers.

 


Self-owned brand models equipped with CVT gearbox


 

    ●AMT gearbox

    Automatic mechanical transmission (AMT) is a new type of transmission that electronically controls the traditional dry clutch and manual gear transmission to realize automatic shifting, and its control process basically simulates the driver’s operation. According to the driver’s intention, the electronic control part of AMT gearbox can automatically control the clutch and shift process. More complicated, we don’t need to go into details. In fact, we can imagine the shift process of AMT in this way. His clutch and shift mechanism are controlled by electronic parts, and the shift will be automatic naturally.

AMT gearbox 
Electric control device and hydraulic actuator of AMT

    The biggest advantage of AMT gearbox is that it does not need to make too much changes to the existing manual gearbox, and its technical structure is relatively simple, and the cost is not too high for manufacturers. In fact, AMT is a manual gearbox with electronically controlled clutch and shift program, so it is the same dry clutch as manual transmission, so the transmission force is more direct and the fuel consumption is more economical. The ordinary AT gearbox adopts hydraulic "clutch", which will have some losses in energy transmission and slightly higher fuel consumption.

AMT gearbox
AMT is somewhat similar to an automatic manual transmission.

    Of course, AMT has obvious shortcomings, that is, the shift quality is not high and it is prone to frustration. If you don’t step on the accelerator, the car won’t move forward even if you shift into D gear. This is somewhat different from the ordinary AT gearbox.

    AMT gearbox supplier: Ma Ruili.

    Manetti-Ma Ruili Group is one of the members of the world’s top 500 Italian FIAT GROUP, with a history of more than 90 years. Manetti Ma Ruili, headquartered in Corbetta, Milan, is a multinational group company engaged in the research, development, design and production of automobile parts, systems and components in the automotive industry, and is in a leading position in the design and manufacture of automobile parts and high-tech systems.

AMT gearbox
Manietti Ma Ruili, a subsidiary of Fiat, which produces AMT, has established a joint venture in Shanghai.

    Tianjin FAW Weizhi

    Ma Ruili Freechoice AMT

    The VIOS 1.3L and 1.5L models are equipped with Toyota engines code-named 8A and 5A respectively, but only the sedan 1.5L automatic flagship model is an automatic transmission model, equipped with Toyota’s 5A+ engine. Although the technology is not advanced, the maximum power of 75kW/6000rpm and the maximum torque of 130Nm/4400rpm are more than enough to propel VIOS’s 1-ton body.

 

gearbox
Weizhi

gearbox
Weizhi is equipped with an AMT semi-automatic gearbox provided by Ma Ruili.

    Weizhi automatic gear matches an AMT semi-automatic gearbox provided by Ma Ruili. This AMT automatic manual transmission has five forward gears, and P gear is cancelled, followed by "left, middle and right arrangement", with N gear and R gear on the far right, D gear in the middle, and a lever slot on the far left to switch between "automatic" and "manual" modes. Its disadvantage is that the shift impact is obvious and the ride comfort is not as good as that of the common automatic gearbox.

    qiruiqq

    Ma Ruili AMT

    At the end of 2009, Chery launched two 1.0L models equipped with AMT gearbox, which also increased the number of models equipped with AMT gearbox in Chery QQ3 from the original two to four, with displacement of 1.0L and 1.1L.. The maximum power and torque of the 1.1L engine are 68 horsepower /6000rpm and 90Nm/3500-4000rpm respectively.


Chery QQ3

AMT
Chery QQ3 is equipped with AMT semi-automatic gearbox provided by Ma Ruili.

    Chery QQ3 AMT model is equipped with a complete set of computer-controlled hydraulic shift system designed and manufactured by Italian Ma Ruili company, which can simulate the driving actions of excellent drivers and choose the best shift timing. According to official data of Chery, AMT model not only saves about 13% fuel than traditional automatic cars, but also saves about 9% fuel than similar manual cars.

 


Self-owned brand models equipped with AMT gearbox


   Extended reading:Real kung fu? Shantou? Detailed explanation of six high-end autonomous engines

    Engine is the heart of a car, and it is also one of the core technologies of a car. A car manufacturer can not build seats, tires or multimedia systems, and even a gearbox can be obtained by purchasing. But what is certain is that no international automobile enterprise even introduces engines by purchase. Engine research and development has become the most invested and enthusiastic research and development project of automobile manufacturers, and it can also be regarded as one of the main signs to measure a manufacturer’s technical strength.

Autonomous engine
Shantou? Real kung fu? Detailed explanation of six high-end autonomous engines

    The research and development of self-owned brand engines started from scratch, from imitation to independent innovation. Although there is still a big gap with the international level, there are also many excellent products in just over ten years. If you can’t remember which engines are available at the moment, don’t worry. Below we will present and introduce these independent research and development achievements to you.

    Chery 2.0TGDI: Turbocharged Direct Injection Engine in Independent Brand

    Vehicle models: Ruiqi G5 and Ruiqi G6.

    Technical Keywords: Turbocharging, Direct Injection, Variable Valve Timing

    In a word: Turbocharged direct injection technology is no longer the patent of Volkswagen, and Chery’s icebreaking finally made these technologies go down the altar and return to the public.

    Chery’s progress in engine research and development is obvious to all. At first, it jointly developed its own ACTECO engine with AVL of Austria. This series of engines are technically quite satisfactory, and there is not much advanced technology applied, and the power output is also very general. However, ACTECO engine laid the foundation for Chery to develop more advanced engines.

Ruiqi 10 Ruiqi G5
Ruiqi G5 2.0TGDI

    During this year’s Beijing Auto Show, Chery launched the Ruiqi G5 equipped with a 2.0TGDI engine. In order to promote this engine, Chery spared no expense to hire Messi to endorse it. Regardless of the final influence, this turbocharged direct injection engine is still worthy of recognition.

Chery 2.0TGDI engine
Chery 2.0TGDI engine

Chery 2.0TGDI engine Chery 2.0TGDI engine
Turbocharger with intercooler (left) Real shot of 2.0TGDI engine (right)

    The 2.0TGDI engine of Ruiqi G5 has a maximum power of 144kw/5500rpm and a maximum torque of 290Nm/1800rpm. Several technologies, such as direct injection GDI in gasoline cylinder, turbocharged intercooling TCI and variable valve timing VVT, are applied. Previously, Chery also launched a 2.0TCI engine with a maximum power of 116Kw/5000rpm and a peak torque of 250Nm. From the data. The 2.0TGDI engine has obvious advantages.


The 2.0TCI engine of Ruiqi G5.

    The 2.0TSI engine carried by Volkswagen Magotan has a maximum power of 147kw/5000-6000rpm and a peak torque of 280Nm/1800-5000rpm. From the data point of view, the power output of Chery 2.0TGDI engine is almost the same, but in terms of reliability and practicality, Chery 2.0TGDI still needs to stand the test of time.

Chery 2.0TGDI engine
2.0TGDI engine output characteristic curve

    The maximum torque of the 2.0GTDI engine reaches 290Nm, which exceeds the maximum bearing torque of the modern 5AT gearbox of 250Nm, so it is only equipped with a 6-speed manual gearbox, while the 2.0TCI model is equipped with a 6-speed manual gearbox and a 5-speed automatic gearbox.

Ruiqi G5

Ruiqi G5  Ruiqi G5
Ruiqi G5

    The body size of Ruiqi G5 2.0TGDI is 4717/1794/1473mm and the wheelbase is 2700mm. Ruiqi G5 adopts the front and rear suspension design of front double wishbone and rear multi-link, and the British Lotus Company participates in the whole process of adjusting the chassis, which can achieve a good balance in sports and comfort.

Aika car network pictures

Aika car network pictures Aika car network pictures
Ruiqi G6 will be equipped with a 2.0TGDI engine.

    In addition, the 2.0TCI engine is also mounted on the Ruiqi G6. The length, width and height of the Ruiqi G6 are 4968mm, 1845mm and 1526mm; respectively. The body size parameters surpass the mainstream B-class cars, such as New Camry, Magotan and even the Eight-Generation Accord, and the 2820mm span is an absolute leader in the wheelbase that reflects comfort. The G6 is equipped with two high-performance engines, namely a 2.0TCI intercooled turbocharged engine and a 3.0 V six-cylinder engine.

Surgery under microscope: the diameter of blood vessels is less than 1 mm, and the needle is thinner than the hair.

  When treating patients, medical staff should not only speak softly, but also build up the confidence to fight the disease for patients with their own professional knowledge. Nanfang Daily reporter Dai Jiaxin photo

  "Many of the tiny blood vessels, nerves and other pipes we stitched under the microscope are less than 1 mm in diameter. The needle used is much thinner than the hair. " Gao Junqing, director of the Department of Repair and Reconstruction of Foshan Traditional Chinese Medicine Hospital, said.

  Under the shadowless lamp, there are a group of doctors who complete the operation under the microscope. They have both the ingenuity of embroidered girls and the physical strength and perseverance of marathon runners; What they have practiced is superb technology and skillful hands. During the coming of the second Physician’s Day, the reporter took you near them to learn about the unknown side of surgery under the microscope.

  Doctors who "fly needles and thread" on blood vessels and nerves

  Neurosurgery is synonymous with "precision, precision and cutting-edge" in the surgical system. With the help of modern science and technology, neurosurgeons have been able to work in the most mysterious and precise organ of the human body — — Realize precise operation in the brain and complete all kinds of incredible operations.

  Cui Lianxu, director of neurosurgery at the First People’s Hospital of Foshan, said that one of the difficulties in neurosurgery is to treat the focus as accurately as possible while minimizing the damage to the surrounding brain tissue. "The size of the lesions in the brain varies, from less than one centimeter to the size of an orange. There are no important blood vessels and nerves around." Cui Lianxu said, therefore, neurosurgical operations can be said to be completed between square inches, and the "important weapon" to accompany neurosurgeons in fighting is the neuromicroscope.

  "Under the microscope, it belongs to a neurosurgeon ‘ Battlefield ’ There is no difference in surgery between millimeters. " Cui Lianxu said, "When neurosurgeons are training in microscopy, one of the examinations is to gently grind off the shell of raw eggs with a grinding drill, and at the same time, they must not hurt the membrane under the eggshell. Behind the technique like carving art is a sense of responsibility as heavy as Mount Tai. "

  In the medical field, hand surgeons can be called "masters of micro-carving" under the microscope. Under the shadowless lamp, they hold a needle and thread invisible to the naked eye, hold their breath, and concentrate on "flying needles" on blood vessels and nerves as thin as hair, with a pair of skillful hands to pick up countless broken fingers and toes. Gao Junqing has been practicing this skill since the first day he entered orthopedics more than 20 years ago. For more than 20 years, he has reborn the severed blood vessels or tissues of many patients.

  "Many of the tiny blood vessels, nerves and other pipes we stitched under the microscope are less than 1 mm in diameter." Gao Junqing said, "Compared with arteries, venous blood vessels are thinner and more difficult to connect." Doctors have to sew up such tiny blood vessels one by one. On the blood vessels of a few centimeters, it is generally necessary to sew 6 stitches, while for large blood vessels, it is necessary to sew more than a dozen stitches. This not only tests doctors’ eyesight, but also tests their endurance. In the long and arduous work, Gao Junqing not only trained the ingenuity of the embroidered girl, but also the physical strength and perseverance of the marathon runner, because many complicated operations took more than 10 hours at a time.

  "If the vascular suture technology is not enough, the blood vessels will still be blocked after the operation, which will directly lead to tissue necrosis." Gao Junqing said that although all the doctors in the department have graduated from graduate school or above and have received standardized training during their medical studies, they still need to undergo rigorous training in the clinical department for about one year. "Doctors should train hard on mouse tails and rabbit ears. Even so, they only have the ability to replant basic severed fingers. It will take several years to improve their clinical skills."

  Yan Shigang, director of the Eye Center of Foshan Second People’s Hospital, said that for ophthalmologists, surgery under the microscope is the coordination of hands, feet, brain and eyes.

  Microsurgery can treat a variety of intractable diseases.

  Cui Lianxu said that the seemingly thick blood vessels under the microscope may be only as thick as hair in reality. If the doctor can’t complete the operation accurately and controllably, it will have unimaginable consequences for the patient. Microscope is a sharp weapon in neurosurgery, and only people with sufficient strength can use it freely.

  Under the microscope, neurosurgeons can perform a variety of operations for patients to treat nervous system tumors, cerebral hemorrhage, brain trauma, intracranial vascular malformations and other intractable diseases.

  Cui Lianxu said that he also performed a difficult operation this year. Patient Ms. Liu (pseudonym) is a native of Foshan. In life, she gradually developed facial numbness, accompanied by symptoms of unstable walking. The examination in the outpatient clinic showed that Ms. Liu had a 3×4×5cm tumor on the left cerebellum. This orange-sized tumor oppressed Ms. Liu’s facial nerve and cerebellum at the same time, causing inconvenience in daily life.

  What Ms. Liu doesn’t know is that the tumor in the cerebellopontine angle has always been a complicated type in neurosurgery. Because tumors often wrap important nerves and blood vessels, a little carelessness will lead to hearing loss, serious imbalance and other complications, and even death. At the same time, the cerebellopontine angle area provides the surgeon with an operable gap, which is only about the size of a dime. Cui Lianxu personally performed microsurgery for Ms. Liu. After the operation, Ms. Liu’s facial feeling improved obviously, and she was discharged from the hospital in just one week, and her walking balance basically recovered when she was discharged. Ms. Liu’s postoperative wound was only 5 cm, which was well hidden in the hairline and could not be found after her hair grew out.

  "A neurosurgeon usually needs more than 10 years of experience before he dares to say that he has certain confidence in the structure and function of the brain, the design of surgery and the grasp of surgery." Cui Lianxu said.

  Surgery related to saving lives and improving the quality of life can be encountered by Gao Junqing almost every week. Last year, Foshan Hospital of Traditional Chinese Medicine also joined the "China Trauma Treatment Alliance Trauma Treatment Center". After joining the national platform for trauma treatment, severe trauma treatment centers in Foshan and surrounding areas will be sent to the hospital.

  "Many patients sent to us are not simply skin injuries and fractures. They are often serious injuries to their limbs. There are serious injuries to the skin, muscles, nerves, blood vessels, tendons and deepest bones, all of which need to be repaired. " Gao Junqing said.

  Surgery for more than ten hours in a row is a common occurrence.

  Under a high-power microscope, facing the bloody stump and finger of the injured, holding a needle and thread that is almost invisible to the naked eye, he is absorbed in sewing tiny blood vessels and nerves. This is Gao Junqing’s daily work.

  Although the little finger is small in area, it has fine structure and complex functions. Once it is injured, it is difficult to treat it, and it is even more difficult to recover and rebuild its function. It requires doctors to make great efforts in surgery and postoperative rehabilitation.

  Gao Junqing said that referring to "living" is both fine and abundant. To live a finger, you may need to sew countless blood vessels and nerves. Except for some cases where stump repair is necessary, most operations take seven or eight hours, or even more than ten hours.

  Liang Lihan, a repair and reconstruction surgeon at Foshan Traditional Chinese Medicine Hospital, said, August 5 — On the 7th, doctors in the department operated all night for three consecutive nights.

  He told reporters that August 6 was an ordinary day, and he participated in six operations, four of which were major operations. "I received a notice of surgery before I went to work on the morning of August 6." He said. It turned out that at 10 o’clock the night before, a patient whose lower limbs were injured by agricultural machinery was sent to the operating room for rescue. After the previous group of doctors operated on the patient all night, Liang Lihan immediately participated in another part of the operation, and the operation lasted until 10 am before the patient’s blood vessels were reopened. At 12 noon, the operation was over and the patient was sent to ICU (intensive care unit).

  It was not an easy day for Liang Lihan. Later, there were patients who were crushed by wheels, resulting in severe trauma to the left limb and lung fracture, as well as patients with limb damage and separation of muscles and bones. He went on the operating table at 7: 35 am on August 6 and didn’t get off the operating table until 9: 00 on August 7. "In the meantime, I only took a break for more than 10 minutes during the surgical handover." Liang Lihan said.

  Gao Junqing said that every minute counts in the operating room. "We must focus on saving lives. Many patients have traumatic hemorrhagic shock, multiple limb injuries, excessive blood loss, and problems with organ function." He said that after saving lives, it is the treatment for physical trauma.

  "There is a time limit for blood vessel connection, which must be between 6 and 6— Connect in eight hours. If it is not connected in time, the limb will be necrotic. " He said that the reason why the operation takes a long time is that there is still a lot of work to be done besides stitching the blood vessels a little bit. For example, debridement may cost 1-mdash; Two hours. "Many times the wound is open, and we must clean up the pollutants a little bit, otherwise it will be infected after surgery."

  After many years of clinical career, Gao Junqing has not only developed a pair of dexterous hands, enough physical strength and patience, but also developed a pair of "iron stomach and copper intestines". As long as he is on the operating table, he can stop drinking water, eating and going to the toilet for hours, and concentrate on his work.

  Although most of the patients admitted by the department are socially vulnerable groups with work-related injuries and car accidents, in Gao Junqing’s view, there is no distinction between the status of patients and the interests of patients are more important than everything else. "Many patients are seriously injured and complicated when they arrive, but as long as there is a 1% possibility, we will do our best to save the limbs, even every finger and toe, and repair and rebuild the function of their limbs."

  "move a knife" on the eye

  Ophthalmic surgery is indispensable in surgery. Yan Shigang, who has more than 30 years of clinical experience in ophthalmology, often works overtime, and there are always more than 40 surgeries a week.

  A large number of operations does not mean poor quality. In clinical work, Yan Shigang insisted on ensuring the quality of medical care, carefully examining the patient’s condition before operation, carefully designing the operation, strictly controlling disinfection and isolation during the operation, and striving for perfection. In the past ten years, he has had the least infection and surgical complications.

  August 7th was Chinese Valentine’s Day, but it was not easy for Yan Shigang. At 7: 00 in the morning, Yan Shigang, who suffered from renal colic at night and stayed up all night, came to the B-ultrasound room for examination. Soon the result came out, and the result was kidney calculi. Immediately, the doctor advised him to rest and treat, but Yan Shigang said, "There are still many patients waiting for me to check in the ward. I can’t delay the treatment of patients because of me." Later, he came to the examination room of the ward.

  That day, he endured his illness and continued his work. Unable to stand the severe pain, with the help of the head nurse and other doctors, he injected an analgesic needle into the muscle. After the pain was relieved, he went on to the operating room for surgery.

  Yan Shigang’s operations are mainly cataract phacoemulsification and intraocular lens surgery, surgery for fundus diseases such as vitreous body, retina and optic nerve, medicine and laser treatment, treatment of complex eye trauma, diagnosis and treatment of various glaucoma diseases, ophthalmic plastic surgery and treatment of orbital diseases. He said that the "moving knife" incision on the eye is only between millimeters, so it requires Excellence.

  ■ portraits of doctors

  The man who guards life under the shadowless lamp

  Many people praise a good doctor for "rejuvenation with wonderful hands" and "getting rid of diseases with hands". Behind the seemingly cold hand surgery, it is the hard work of countless doctors. They have high work intensity, high work pressure, high surgical risk and physical and mental fatigue, but every time the operation is successful, they have great joy in their hearts. Now, let’s approach this group of doctors who guard their lives under the shadowless lamp, listen to their stories and listen to their voices.

  Liu Hongzhen, Director of the Day Surgery Center and Director of the Endoscopy Center of Foshan First People’s Hospital: the "patron saint" of life in the operating room.

  Liu Hongzhen has been a doctor for 34 years and keeps improving his medical skills. In 2010, he successfully completed the anesthesia of the first liver transplantation operation, and so far he has completed more than 200 cases of anesthesia of liver transplantation operation, which has revived patients. He also undertook the anesthesia of the first coronary artery bypass surgery in Foshan First People’s Hospital.

  "As an anesthesiologist, in addition to knowing anesthesia knowledge, you should also know about surgery and internal medicine. An anesthesiologist is equivalent to a physician in the operating room. " Liu Hongzhen said that the patient’s vital signs, respiratory system, circulatory system and internal environment are all maintained by anesthesiologists. At the same time, the anesthesiologist also needs to deal with various complications during the operation. Surgeons cure diseases and anesthesiologists save lives, so anesthesiologists are also the "patron saint" of life in the operating room. In addition, anesthesiologists also undertake comfortable medical care (painless gastrointestinal examination, fiberoptic bronchoscopy, etc.), painless delivery, postoperative analgesia, pain treatment and other tasks, and anesthesiologists have traveled all over the hospital.

  Xu Zhaoyan, Chief Physician and Assistant Director of Cardiovascular Department of Foshan First People’s Hospital: Never give up on patients with myocardial infarction.

  "Cardiovascular medicine is a place to test the energy and endurance of doctors. Many patients encountered here are in dangerous conditions, but if they are treated in time, they will get better very quickly and the prognosis is still very good." Xu Zhaoyan said.

  "Patients with acute myocardial infarction need timely rescue and interventional surgery, otherwise they may face death at any time. Such patients are also a great test for doctors. " Xu Zhaoyan said.

  He once treated a patient with acute myocardial infarction in his forties. "At that time, he had repeated ventricular fibrillation, but we still didn’t give up the treatment. We gave him cardiopulmonary resuscitation and gave him interventional surgery." Xu Zhaoyan said, "In the end, such patients turned the corner. Now that 10 years have passed, he is still very healthy. "

  Zhu Min, Director of Ophthalmology, Foshan First People’s Hospital: Respecting every patient’s "Light Messenger"

  "When I was a child, I watched the movie" Man to Middle Age ".The scene in which the protagonist helped others to see the light again was deeply engraved in my mind. Since then, I have been determined to become an ophthalmologist." Zhu Min said that after becoming an ophthalmologist, when the patient uncovered the gauze, the doctor’s most fulfilling and proud moment was when he saw the bright smile on his face.

  Zhu Min, who has been engaged in ophthalmology clinical work for more than 30 years, has won the praise of patients and colleagues with his rich clinical experience, skillful surgical skills and delicate way of getting along with others, and is called "the messenger of light".

  In the face of difficult and complicated cases, she will examine the patients in detail and make treatment and surgical plans. Ophthalmology often receives patients with myopia, cataracts and blindness caused by other diseases. Because they are worried about blindness or have been plagued by blindness for many years, many patients will be anxious when they come to see a doctor, and some will be grumpy. "To treat these patients, our ophthalmologists should speak softly and build up confidence in the fight against the disease with their own professional knowledge." Zhu Min said, "The pain of the patient’s blindness can’t be described in words. Therefore, we should be patient with the patient and relieve his anxiety. At the same time, we should tell the patient his illness realistically. Let him not despair and not lose heart. "

  At the peak of summer vacation, ophthalmology has to face more than 300 patients every day, and the work is very heavy. Zhu Min often reminds the medical staff in the department to be serious and responsible. "If any one of the patients is neglected, it is 100% negligence for the patient. Therefore, we must respect every patient and treat every patient sincerely. " Zhu Min said.

  In recent years, the situation of prevention and control of juvenile myopia is grim, and Zhu Min led the medical staff in the department to carry out prevention and control of juvenile myopia, and achieved remarkable results.

  Wang Junhua, Chief Physician of Biliary Surgery, First People’s Hospital of Foshan: A skilled aid doctor in Xinjiang.

  "As a doctor, is to save lives. The medical level there is relatively backward and needs us more. " Wang Junhua said. In August 2018, Wang Junhua took the initiative to sign up for Xinjiang and set foot on Jiashi County, Xinjiang, thousands of miles away to carry out a one-and-a-half-year aid work.

  Shortly after arriving in Xinjiang, I received a 28-year-old patient, Gulinur Abulimiti. Her severe abdominal pain has lasted for half a year, and her weight has dropped from 50 kg to 30 kg, as thin as a paper man. In order to cure the disease, Gulinur Abulimiti had to quit his favorite job, and seven hospitalizations cost tens of thousands of yuan before and after, and the family was in trouble. Considering that the patient may have intestinal adhesion and chronic incomplete intestinal obstruction, surgery must be performed immediately. However, there are different opinions in the consultation. Some voices believe that the risk of surgery is too great, and Wang Junhua should not take this risk. However, Wang Junhua faced the difficulties and finally, the operation was successfully completed.

  When Wang Junhua first arrived at the General Surgery Department of Jiashi County People’s Hospital, the professional strength of the department was very weak. He began with the refinement of departments, dividing the original general surgery into hepatobiliary surgery and gastrointestinal surgery, in which patients with gastrointestinal tumors specialize in gastrointestinal surgery. He founded hepatobiliary surgery, gastrointestinal surgery and ultrasonic interventional diagnosis and treatment technology in Jiashi County People’s Hospital, which filled 13 technical gaps in Jiashi County People’s Hospital. At the same time, through mentoring and other means, a medical team that can’t be taken away gradually grew up in Jiashi County People’s Hospital.

  Dong Julang, Director of Obstetrics and Gynecology, Foshan Second People’s Hospital: It’s like clockwork at work.

  Dong Julang said that she likes obstetrics and gynecology. "The joy of the mother after the smooth delivery, the crying of the baby, the challenges of various gynecological operations and the joy of successful surgery, as well as the same feeling from patients to friends and from friends to relatives." Dong Julang said.

  Dong Julang and his wife are both doctors, and their clinical work is very busy, so their daughter, who was only three months old at that time, can only be sent to a nursery. When both of them work shifts, her daughter will live in the neighbor’s house upstairs as a teacher … … The daughter is less than two years old, and Dong Julang’s husband has gone to other places for a master’s degree. She has to work shifts, have surgery and further study. In those three years, she often took her daughter on duty together. When there is an operation in the middle of the night, she can only knock on the door of the neighbor’s house to take care of her daughter.

  As their daughter grows up slowly, they put all their energy into their work, all day long, including patients, medical records, surgery, meetings and study. The department is growing day by day, and more and more operations are done. Because the husband is doing MR (nuclear magnetic resonance), it is his job to evaluate all patients with gynecological tumors before operation, to implant obstetric placenta and to check venous thrombosis. With the increasing diagnostic accuracy, benign/malignant tumors, borderline tumors, lymph node metastasis/how many metastases, scar pregnancy implantation, and the choice of surgical opportunity for pelvic abscess & HELIP; … Her husband’s work and hers complement each other.

  "As a doctor, I feel particularly happy every time I succeed in surgery. After being happy, I often reflect on the surgical process and what is not done well enough. " Dong Julang said, "Before each operation, we will make full preparations to predict possible complications and injuries."

  Dong Julang said that as a doctor, his daily work is full, including outpatient service and surgery. When he goes to work, the whole person is like clockwork. (Nanfang Daily reporter Xia Xiaoyu)

Official notification: "A high-speed truck in Guilin rear-ended tank car": One person was injured, and a small amount of benzene leakage from hazardous chemicals has been properly disposed of.

  CCTV News:According to the news of "Lingui Today" by WeChat official account, the office of Lingui District Government in Guilin, Guangxi, on October 24th, the Lingui District Government of Guilin issued the "Information Bulletin": At 13: 49 on October 23rd, a truck rear-ended tanker traffic accident occurred near Yangshuo, G65 Baomao Expressway, 2528 kilometers to Guilin. One person was injured in the accident, and a small amount of benzene leaked from the tail of the tank car.

  After the accident, the Guilin Municipal Party Committee and the Municipal Government attached great importance to it and organized emergency, public security, ecological environment and other departments to rush to the scene for disposal. The injured have been sent to the hospital for treatment in time, and their vital signs are normal. Highway traffic police quickly diverted traffic, and traffic is gradually restoring order. Relevant departments took measures such as foam gun dilution, sand covering on the ground around the tank car, sandbags to block the diluted liquid, pumping back and transferring, and properly disposed of the site. At present, the remaining hazardous chemicals in the tank car have been transferred to a safe place, and nearby villagers have been organized to evacuate and resettle. The ecological environment department will carry out continuous monitoring and sampling at the site and around. All emergency response work is being carried out in an orderly manner.

  At 1 o’clock in the morning on the 24th, Yangshuo lifted traffic control in the direction of Guilin, and vehicles resumed traffic.

Buick’s "blood"! High cost performance and good reputation.

The brand-new design is still very recognizable. The flying wing air intake grille is a family style, and the whole air intake grille is wrapped with silver decorative strips to emphasize the texture, and it is also decorated with bold silver decorative strips. The headlight group of the new car is quite full, and the lines of the whole light group are still very clear, showing a certain aggressiveness. The raised straight lines on the hood emphasize a certain sense of strength and layering, and the fog light area of the new car is concave. The periphery is also decorated with cut lines to enhance the three-dimensional sense. The trapezoidal air intake is equipped with a black mesh, and the front bumper of the new car is still very solid, and the front face of the whole car is still very generous.

The overall style of Buick Angkewei’s interior adopts the embracing cockpit design, and the newly designed ergonomic seat improves the ride comfort. The overall interior style is luxurious and exquisite. The center console uses a popular floating LCD screen with embedded design, and supports the interconnection function of Apple carplay and Baidu carlife.

The length, width and height are 4822×1883×1705mm respectively, and the wheelbase has reached 2833 mm. In the same class, the wheelbase of Angkewei ranks 113th. As an SUV, its body size does not occupy much advantage in its class, and its internal seating space is only basically enough. After all, it is limited by the length and shape of the body. The skylight of Angkor Plus four-wheel drive Avia provides a wider view, which can create a better visual environment and good sensitivity for the rear passengers and increase the light entrance for the whole vehicle. Among the models of the same price and class, Angkor’s trunk volume ranks 83rd. It can basically meet the luggage space for family travel. But there is no extra hidden storage space.

Angkewei is equipped with a 2.0 engine with a maximum output of 174kW and a maximum torque of 350Nm. It will definitely bring unforgettable control charm. Angkewei’s official measured zero-acceleration score is 8.1S, ranking 174th among more than 800,000 SUV models.

Angkewei’s active/passive safety configuration is complete, includingAutomatic parkingZero tire pressure endurance tireAutomatic parkingSteep slope descenthill start assist controlknee airbagHUD head-up displayAnti-lock braking (ABS)Braking force distribution (EBD/CBC, etc.)Brake assist (EBA/BAS, etc.)Traction control (ASR/TCS, etc.)Active noise reductionEngine start and stopSide safety air curtainWireless charging of mobile phonenight vision systemLED daytime running lightsForward reversing radarTire pressure monitoringSteering wheel heatingBody stability control (ESP/DSC, etc.)Rear reversing radarFatigue reminderRemote parkingChild seat interfaceLane keeping (LKAS)Equal configuration.

Among them,Automatic parkingYou can avoid stepping on the brakes for a long time or needing to pull frequently;Steep slope descentCan safely pass through steep slope road conditions at low speed;knee airbagReduce the injury of the car interior to the occupant’s knees in the secondary collision.

In addition to the above description, we can also go to the Easy Car Forum to browse more real car feedback from actual buyers, or use our experience.

The bloody stills of "Eavesdropping" were exposed, and the three men ended miserably


Shattered to pieces – Gu Tianle

Poor Wu Yanzu was "hanged"

Liu Qingyun "died" wasteland

Liu Qingyun was "buried alive"



  Created by the two teams of "Infernal Affairs" and "The Disciples", the police crime blockbuster "Eavesdropping", which will be fully released on July 24, has been screened all over the country in recent days and has won unanimous praise from both inside and outside the industry. Audiences are full of praise for the wonderful performances of Liu Qingyun, Gu Tianle and Wu Yanzu, and the interlocking plot of the film also makes people amazed.

  The climax of the entire film is a scene in which the three protagonists are "crushed" – Gu Tianle is "crushed", Wu Yanzu is "strangled" and Liu Qingyun is "buried alive", which completely exceeds the imagination of the audience and surprises all the audience. Regarding the current ending, Mak Zhaohui said: "This is the most satisfactory ending for me. At first, I was afraid that it would not pass the review, but in the end it passed. I am very happy."

Louis Koo’s "Eavesdropping" was "crushed" and his family was exterminated

  In "Eavesdropping", Gu Tianle plays a low-level old police officer Yang Zhen, who has four children, the youngest of whom is seriously ill, so his life is very difficult. In addition, the house leak happened to rain overnight, and Lao Yang found out that he was suffering from cancer. Therefore, for the life of his wife and children behind him, he chose to take the risk and took the first step of crime – using the internal intelligence from eavesdropping to speculate in stocks, but one step was wrong, and eventually he took the road of no return, and his brothers and family suffered comprehensively.

  In the end, Gu Tianle’s family was plotted by Ma Zhihua, and the family was hit by an oncoming truck. The whole family suffered a complete accident, and Gu Tianle was "crushed" on the spot… For such a tragic ending, when asked how Gu Tianle viewed and interpreted it, Gu Zai said: "I was very shocked when I first saw the script, and I felt sorry for Lao Yang and his family. When I just got a lot of money, I didn’t have time to enjoy it, but it was unexpected… But this is very cautionary, so that people don’t go astray because of temporary greed."

Liu Qingyun was "buried alive" Wu Yanzu was "strangled" and ended miserably, no less than Gu Tianle

  His two good brothers, Liu Qingyun and Wu Yanzu, also suffered accidents one after another, all because the greed at that time could not be controlled, and Ma Zhihua was ruthless, hoping to kill the root cause. Among them, Wu Yanzu’s Xiao Xiang was followed, tied up and strangled in the secret room, and Liu Qingyun was ambushed while going to rescue Wu Yanzu. Finally, he was taken to a wild wasteland, shot several times, and "buried alive" in the pit, recreating the scene in "Detective". "Although they were all buried alive, in" Detective "they were voluntary, while in" Eavesdropping "they were forced," Liu Qingyun explained.

  Faced with the ending of the three protagonists "****", there are always audiences who will wonder how the movie will end. Will the bad guys really get away with it? If you want to know the real ending, you might as well go to the theater to support "Eavesdropping" and find out the answer.

Lynk & Co 08 fell off a cliff, the video in the car was exposed, and netizens saved hundreds of millions of advertising dollars

Car owners are concerned about safety first, because safety is the most important luxury when buying a car. Recently, the domestic car brand Geely’s 08 model saved the lives of three people. The owner wrote an article "Lynk & Co – Give Me a Second Life", which triggered a heated discussion on the whole network.

The "driving recorder" of the car accident was exposed by the owner, and the topic of "driving recorder photographed the whole process of the car falling off the cliff" caused 2 million people to watch and was hot searched on the top of the headline.

According to the owner of the car, Mr. Wei, on February 4, he took two family members and drove the vehicle home when he encountered ice and snow, the road was slippery, and a truck came over. To avoid the truck, his car lost control for a while, rolled several times, and finally fell to a 60-meter cliff.

After the vehicle landed, the intelligent assistant in the vehicle immediately detected the accident, automatically sent an emergency distress signal and located it, and then the rescue personnel quickly arrived at the scene.

Finally, the traffic police recorded on the accident certificate that the vehicle fell from a height of 60 meters, but the four pillars of the vehicle were intact and the airbags were ejected in time to ensure the safety of the occupants.

Fortunately, they were wearing seat belts, and none of them were in danger, except for minor abrasions.

After the accident, the car owner mentioned in the group chat that whoever said I was in a hurry with Lynk & Co really saved my life.

According to the traffic police who handled the accident, there was a traffic accident at the same location in July this year, but that accident caused two deaths.

"Someone argued with me a few days ago that I pay too much attention to safety!! What I want to say is: in order to drive by yourself and not let my family worry about the safety of the car with my family, I must put the safety of the vehicle first! Because your life and your family’s life come first!! I have always bought domestic cars because I have always agreed with the joint venture car cutting leeks…"

"60 meters cliff oh my god. If this were a Mercedes Benz, it would be deflated. It seems that Lynk & Co really uses good steel."

Coming! New year’s day holiday arrangement

Red Star News

today
General Office of Beijing Municipal People’s Government
Officially released
About New Year’s Day in 2024
Notice of holiday arrangement
↓↓↓
New year’s day holiday calendar
Forward collection
↓↓↓
On October 25, according to the Chinese government website, the notice of the General Office of the State Council on some holiday arrangements in 2024 is as follows:
With the approval of the State Council, we hereby notify you of the specific arrangements for the holidays of New Year’s Day, Spring Festival, Tomb-Sweeping Day, Labor Day, Dragon Boat Festival, Mid-Autumn Festival and National Day in 2024.
First, New Year’s Day:It is a holiday on January 1st, even with weekends.
Second, the Spring Festival:From February 10 to 17, the holiday was suspended for 8 days. Go to work on February 4 (Sunday) and February 18 (Sunday). Encourage all units to implement the system of paid annual leave and arrange employees to rest on New Year’s Eve (February 9).
Third, Tomb-Sweeping Day:From April 4 to 6, we will have a holiday for 3 days. Go to work on Sunday, April 7.
Fourth, Labor Day:May 1 ST to 5 th, a total of 5 days. Go to work on Sunday, April 28th and Saturday, May 11th.
Five, Dragon Boat Festival:June 10th is a holiday, even with weekends.
Six, Mid-Autumn Festival:From September 15th to 17th, we will have a holiday for 3 days. Go to work on Saturday, September 14th.
Seven, National Day:From October 1 ST to 7 th, there will be a holiday for 7 days. Work on September 29th (Sunday) and October 12th (Saturday).
During the holidays, all regions and departments should properly arrange the work of duty and safety, security, epidemic prevention and control, etc. In case of major emergencies, they should report them in time and properly handle them according to regulations to ensure that the people spend the holidays peacefully.
the General Office of the State Council
October 25, 2023
Source: Beijing Daily (ID: Beijing _ Daily), China Government Network.

-Recommended reading-

Well-known brand 680 million sold the building to save themselves! The price of real estate sold has risen by 300 million in ten years.
The news came! The famous actor died, and his works became a household name.
Reporting/feedback