Huawei Ascend P7 compared to the previous Ascend P6 has a lot of upgrades, such as a 5-inch full high definition screen, the new HiSilicon Kirin 910T processor, 8 million + 13 million pixel dual camera and the new Emotion UI 2.3, These soft and hard configuration upgrades are described in detail later.
Of course, in addition to the improvement of performance and experience, Huawei Ascend P7 basically maintains the overall style and design language of Ascend P6 in terms of appearance, but there are many changes in the details, which are better than the previous visual effects and more user-friendly. This is also the origin of the title of this article, because Huawei Ascend P7 has indeed made more or less progress in all aspects, and these advances have raised the user experience to a level.
If you are familiar with Huawei Ascend P6, the first time you see this phone, you will be sure that this is a sequel to the P series, because their design language and overall shape are very convincing. To paraphrase a sentence in the car review, Huawei Ascend P7 uses a "family front face" design. Of course, I think it is more appropriate to change to a "family body" design.
Huawei Ascend P7 uses a 5-inch full-high definition in-cell screen, and the machine also uses Corning’s third-generation Gorilla glass protective screen. To be honest, after the author came into contact with many touch screen models, Corning Gorilla not only performs well in terms of scraping and wear resistance (the third-generation anti-scratch capacity enhancement is 300%), but also has a better touch and texture than ordinary glass. Of course, as the foundation of the screen, the display effect of Huawei Ascend P7 is indeed satisfactory. Whether it is color reproduction, screen brightness and viewing angle, it is very good. The full-fit screen also makes the whole its transparency higher and the intuitive experience better.
In terms of details, the Huawei Ascend P7 has also undergone considerable changes. The most intuitive impression to the author is the increase in the screen ratio. Compared with the previous Ascend P7, the screen ratio is higher, and the visual impact of the whole machine has also been improved. With the 2.97mm ultra-narrow frame, this allows the screen to increase while the size of the entire fuselage is better controlled. The performance of the grip is worthy of recognition.
It is worth mentioning that the design of the Huawei Ascend P7 at the "chin" has undergone some changes. Compared with the previous two-stage design, the design of the machine looks more coordinated, and the entire front is covered by glass, which also adds a bit of texture. Of course, there is still a part of the bottom of the Huawei Ascend P7 that stands out, which is also to reflect the design of its border.
The back of the Huawei Ascend P7 can be said to be very different from the Ascend P6. Compared with the previous stainless steel brushed backplane, the Huawei Ascend P7 adopts a new glass backplane design and uses the same Corning Gorilla third-generation glass as the screen. The use of double gorilla glass before and after ensures the scratch resistance of the front and rear while also providing a guarantee for the strength of the whole machine.
In terms of details, the upper left corner of the back of Huawei Ascend P7 is a 13 million pixel camera, with an LED flash below, and the middle position is Huawei’s logo, the same as the front panel design, Huawei Ascend P7 The backplane has also cancelled the two-stage design, and the speaker has also been placed at the bottom left of the back, in a vertical strip.
The frame design of the Huawei Ascend P7 is almost the same as that of the Ascend P6. Both models use a double-C chamfer design, which adds a lot to the design of the whole model. The entire frame adopts a metal brushed design, with chamfer design on both sides. The metal texture is very prominent, and the visual effect is also improved a lot. It is worth mentioning that there are certain "retracted edges" design on both sides of the bottom of the Huawei Ascend P7, which makes the front of the entire fuselage look less "hard".
There is no excuse or function on the left side of the Huawei Ascend P7 body. The previously controversial headphone jack has been transferred to the top of the body, and the design of the dust cover has been cancelled. There is also a noise-canceling microphone next to it. At the bottom of the body is a microUSB excuse and microphone.
Most of the keys and sockets of Huawei Ascend P7 are concentrated on the right side of the fuselage, the top two keys are the volume key and the power key, the power key in addition to the keycap with a concentric circle design, there is a certain depression below, so that the finger touch better, but also increased a certain visual effect. The position below is the SIM card slot and the microSD card slot. Both card slots have text prompts for their location, and it can also be seen that the model in my hand supports TD-SCDMA and LTE networks. It is reported that Huawei Ascend P7 will use a chip that supports 5-mode 10-band. The mobile version of Huawei Ascend P7 in my hand is a single-card design, while other versions use dual-card versions and support TD-LTE and FDD-LTE dual 4G networks. In terms of battery life, Huawei Ascend P7 will use a 2500 mAh battery.
www.diankeji.com is a leading information media focused on the global TMT industry.
As the winner of Jinri Toutiao Qingyun Plan and Baijiahao 100 + Plan, the 2019 Baidu Digital Author of the Year, the most popular author in the field of Baijiahao Technology, the 2019 Sogou Technology Culture Author, and the 2021 Baijiahao Quarterly Influential Creator, he has won the 2013 Sohu Best Industry Media Person, the third place in the 2015 China New Media Entrepreneurship Competition Beijing Competition, the 2015 Radiance Experience Award, the third place in the 2015 China New Media Entrepreneurship Competition Finals, and many other awards.
Submission, business cooperation, please contact WeChat official account
Statement:The text version of the original article on this site belongs to Dianqi Technology, and the author and source must be indicated when reprinting; the article reprinted on this site only represents the original author’s point of view, not the position of Dianqi Technology, and the graphic version rights belong to the original author. If there is any infringement, please contact us to delete it.
